Get matched with top drain cleaners in Piru, CA

There are several homemade solutions for clearing a clogged sink that don’t involve pouring harsh chemicals down your drain. Start by pouring hot (but not boiling) water down the drain. This can help dissolve and flush away grease and gunk. A splash of dish soap down the drain can also cut through fat and make it easier to clear the drain. For a more stubborn blockage, grab a plunger and give it a few firm pumps to dislodge the clog.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

You can often unclog a garbage disposal in less than 10 minutes, though sometimes you might need longer if you’re unsure what’s causing the clog. For minor clogs, consider plunging the drain, flushing the drain with baking soda and vinegar, or using an Allen wrench to free the clog. If the clog is more severe, contact a local plumber.

If the drain is frozen, the pipes connecting to the washing machine are likely frozen. If the hot water trick doesn’t also unfreeze the washing machine pipes, you can gently apply heat with a hair dryer on the lowest setting. Start at the end of the pipe closest to the faucet to prevent pressure from building in the pipes, and make sure the faucet is open to drain the water as it melts.