Q: How much does it cost to fix a gas leak?

• <div><p><a href="https://www.angi.com/articles/average-gas-line-repair-and-installation-costs.htm">Fixing a gas leak costs</a> about <b>$45 to $150 per hour</b> for a plumber or gas line specialist. The job&rsquo;s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about <b>$120 to $170</b>. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to <b>$1,500 to $5,000</b>. Keep in mind that gas leaks are very serious issues, so don&rsquo;t hesitate to contact a plumber or gas line specialist immediately.</p></div>

Question 1

Do gas companies relight pilot lights?

Accepted Answer

•

Most gas companies and utilities brokers will send a technician to relight a pilot light, but this may demand a service call fee. Contact your local gas company to inquire about available pilot light services. If it’s a no-go, just follow the aforementioned steps and light the manual boiler’s pilot light yourself.

Question 2

Is pipe measured by ID or OD?

Accepted Answer

•

In North America, pipe measurements are listed as the nominal pipe size (NPS). This measurement refers to the outside diameter. As an example, a 1/2-inch copper pipe has an outside diameter of 5/8 of an inch. If a hardware store lists a pipe as having a 2 NPS, it means that all the pipes with this measurement have a 2 ⅜-inch outside diameter, regardless of wall thickness and inside diameter.

Question 3

How much does it cost to fix a gas leak?

Accepted Answer

•

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

Question 4

What tubing should I pick for my new natural gas line?

Accepted Answer

•

If you're connecting your gas line to appliances, the pro doing the work may recommend flexible corrugated stainless-steel tubing (CCST). Polyvinyl chloride (PVC) with high-density polyethylene (HDPE) is another relatively inexpensive material commonly used for residential pipes. Ultimately, you'll need to find out what is permitted based on the code requirements in your area.

Question 5

Can I install a gas grill myself?

Accepted Answer

•

You can maneuver your gas grill into place, but you cannot connect the grill to your gas source yourself. All municipalities mandate that a certified plumber carry out this work, so you’ll have to reach out to a plumber or a gas grill installation company in your area. Given how dangerous a gas leak can be, gas lines and connections are highly regulated, so you’ll need a professional’s help and a permit to install a gas grill.