Get matched with top electricians in Lawndale, CA

Wiring an outlet can be done safely by someone with the proper knowledge and tools, but it can also be dangerous if not done correctly. If you're not comfortable working with electrical systems, it's best to hire a licensed electrician to do the job for you. That way, you can rest assured that your outlet will be rewired safely and quickly. 

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

A GFCI outlet is easy to identify. It features two buttons on the face that read “TEST” and “RESET.” Sometimes, the “RESET” button is red. These are positioned in the center of the two three-prong plug-in slots you see on a regular outlet. Some also feature a green light to indicate when the outlet is working, changing to red when there is a problem.

Just as fluorescent lights are more efficient than incandescent lights, LED lights are more efficient to run than fluorescent lights. The specifics will vary from product to product, but LED lights are typically twice as efficient as equivalent fluorescent lights. A 13-watt CFL bulb can replace a 60-watt incandescent bulb, but a 6- to 8-watt LED bulb can offer the same amount of brightness. Fluorescent lights offer about 50 lumens per watt, while LEDs offer about 100 lumens per watt. LED light bulbs typically last two to three times as long as CFL bulbs, too.