Get matched with top welders in La Canada Flintridge, CA

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Q: Are beams and joists the same?

• <div><p>No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.</p></div>

Q: Does steel framing increase home value?

• <div><p>Using a steel frame may raise the value of your home. Steel is more heat resistant, has better longevity, and doesn&rsquo;t need any upkeep compared to traditional wood. You can also customize a steel build a little easier than other materials like brick, concrete, and vinyl&mdash;which have trouble bending and adapting to renovations.</p></div>

Q: Is a wood or steel beam better in a home?

• <div><p>A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it&rsquo;s a better option for larger structures or if you want an open space under your home that doesn&rsquo;t have posts as obstructions. However, <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">steel I-beams cost</a> more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.</p></div>

Q: Do I need an LVL beam?

• <div><p>Beams made out of traditional lumber can often only span 8 to 12 feet without requiring vertical supports, so if you want a wider opening to create a more open floor plan, you might need an LVL beam. LVL beams can span up to around 30 feet without the need for load-bearing walls or vertical supports underneath, making them a better option for keeping your home as open and airy as possible. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in La Canada Flintridge, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in La Canada Flintridge, CA

*The Angi rating for Welding companies in La Canada Flintridge, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in La Canada Flintridge, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 23, 2025

Reviewed in June 2017
Excellent. I called first for a free estimate, Someone came the next day and took photos. Next day, received a written estimate, much lower than the overpriced misguided 'other vendor.' Approved quote online and the next day, bright and early, the repairs were done. Benji replaced my bent,...
The Gatekeeper
Request a quote
Reviewed in June 2015
Fantastic. Method Garage Doors and Gates personnel (project managers, welders, gate and fencing builders) were very professional in designing, fabricating, installing the wrought iron pedestrian gates, a vehicle sliding gate, and the gate operator track. On the scheduled date of...
Method Doors & Gates
Request a quote
Reviewed in January 2014
Weld new hinges on gate door as the originals had broken because they were improperly mounted in the first place.
Greg's Portable Welding
Request a quote
Reviewed in February 2013
I had a very pleasant auto repair experience with these guys. The muffler was literally falling off of my car. I looked on Angie's List and found the listing for Joe's Muffler. I pulled up to the garage and the mechanic waved me in. He gave me a really reasonable price which I accepted. He...
Joe's Muffler & Brakes
Request a quote
Reviewed in December 2012
The guy who came out made a lot of mistakes and use poor (even dangerous) workmanship. After re-plumbing the hot water heater, he either didn't notice or tell me that I also had a gas leak in the gas line to my hot water heater! I noticed it two days later, on my own, after he was long gone. In...
HITT PLUMBING CO
Request a quote
Reviewed in April 2011
The old downspout, that burst in heavy storms last winter, was custom made of welded metal. It had a welded, angular jog to get around a plumbing access opening in the wall. The new ABS downspout has a pre-fab rounded elbow at the top and a straight pipe to the ground. The cost of a new...
Iselt Handymen Services
Request a quote
Reviewed in March 2009
Luis is VERY punctual. For the estimate, he arrived an hour earlier than expected. The day of the job, I found him outside, an hour earlier, working on the car damage to the fence. Luis & his assistant worked quickly, fastening, welding, & painting.
5 Star Wrought Iron
Request a quote
Reviewed in November 2008
Estimate was $6,750. I received several estimates from other companies, some lower, but this was just a job to them. Mitch was cheerful & creative. He could see that because of my disability, this job had to be done right. Both high & low power electrical circuits also had to be run. After...
California Electronic Gates
Request a quote
Reviewed in November 2005
ON THIS PARTICULAR VISIT MY EXPERIENCE WAS VERY GOOD, I HAD A LEAK IN MY EXHAUST, THEY LOCATED IT IN A PART OF MY EXHAUST THAT WAS NOT LEGALLY REQUIRED TO BE THERE, SO THEY CUT IT OUT AND WELDED IN A NEW SECTION OF PIPE, ALL WITHIN HALF AN HOUR.
LA TORTUGA AUTO REPAIR
Request a quote

Get matched with top welders in La Canada Flintridge, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in La Canada Flintridge, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in La Canada Flintridge, CA

Find Welders in La Canada Flintridge

808

808

GT Steel Inc.

GT Steel Inc.

Metal master welding

Metal master welding

Ironwood Carpentry LLC

Ironwood Carpentry LLC

Raw steel

Raw steel

GZ DESIGNS

GZ DESIGNS

Danz Genuine Fabrication

Danz Genuine Fabrication

Marco's metal works

Marco's metal works

Rockman melts

Rockman melts

Bronze Wrought Iron

Bronze Wrought Iron

The La Canada Flintridge, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in La Canada Flintridge? Check surrounding areas for Welders.

Which Welding task are you tackling?Find La Canada Flintridge Welding services on Angi who specialize in any of these tasks