Get matched with top fire pit installation pros in Dos Palos, CA

If you plan to put a fire pit on a grassy area, be sure to put compacted paver sand down first to help level out the ground and add better heat protection. If you’re placing a fire pit on hardscaping, like a concrete patio, consider placing a fire pit mat down first. This can add more protection from the heat and also protect the look of your hardscaping if you choose to remove the fire pit in the future.

Yes, it is possible. An electrical fire can break out if the compressor has inadequate ventilation. When it overheats but doesn't have a proper thermal cutout, this can cause the motor to short-circuit and catch fire. This risk is exacerbated if flammable materials, like dust and fallen leaves, are clogging the unit. The compressor overheating won't start a fire by itself, but poor maintenance and installation can increase the risk once it hits its breaking point and short-circuits.

Yes, you should seal and cap an unused chimney to protect it from damage. Sealing the structure helps prevent moisture damage, which can lead to issues like cracks, spalling, efflorescence, and damaged mortar joints. Capping the chimney is also crucial to prevent blockages, damage from invasive critters, and downdrafts, while still allowing for proper air ventilation to manage moisture. For the best results, consult a chimney professional to select the right type of chimney or flue cap for your home. It's also wise to continue with annual chimney inspections to maintain the structure's integrity.

Yes, fire extinguishers eventually expire. However, the good news is that a properly stored fire extinguisher can last a decade or longer. They don’t have an expiration date on the canister, but you can check the manufacturing date on the “UL” nameplate near the classification information. Maintenance will also give your fire extinguisher longevity. Check the gauge at the top of the extinguisher every month. You'll want to make sure the gauge needle is in the green section, and if a hose or nozzle has been used or damaged, you need to replace it.