Is a wood or steel beam better in a home?

• <div><p>A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it’s a better option for larger structures or if you want an open space under your home that doesn’t have posts as obstructions. However, <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">steel I-beams cost</a> more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.</p></div>

Is LVL more affordable than steel I-beams?

• <div><p>Yes, an LVL beam is more affordable than the <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">cost of a steel I-beam</a>, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists. </p></div>

How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Get matched with top welders in Culver City, CA

Q: Do I need an LVL beam?

• <div><p>Beams made out of traditional lumber can often only span 8 to 12 feet without requiring vertical supports, so if you want a wider opening to create a more open floor plan, you might need an LVL beam. LVL beams can span up to around 30 feet without the need for load-bearing walls or vertical supports underneath, making them a better option for keeping your home as open and airy as possible. </p></div>

Q: Why are they called Lally columns?

• <div><p>Lally columns are named after their founder, John Lally, who owned a construction company in the 1800s. He invented the columns as a means of providing temporary support for beams and rafters in homes his company was renovating. The original Lally columns were also made of steel, although the inventory used a thicker gauge metal, which provided additional support for larger projects and long-term structural solutions.</p></div>

There are 8 highly-rated local welders.

Need a pro for your welding project in Culver City, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Culver City, CA

*The Angi rating for Welding companies in Culver City, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Culver City, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 08, 2025

Reviewed in June 2017
Excellent. I called first for a free estimate, Someone came the next day and took photos. Next day, received a written estimate, much lower than the overpriced misguided 'other vendor.' Approved quote online and the next day, bright and early, the repairs were done. Benji replaced my bent,...
The Gatekeeper
Request a quote
Reviewed in June 2015
Fantastic. Method Garage Doors and Gates personnel (project managers, welders, gate and fencing builders) were very professional in designing, fabricating, installing the wrought iron pedestrian gates, a vehicle sliding gate, and the gate operator track. On the scheduled date of...
Method Doors & Gates
Request a quote
Reviewed in January 2014
Weld new hinges on gate door as the originals had broken because they were improperly mounted in the first place.
Greg's Portable Welding
Request a quote
Reviewed in February 2013
I had a very pleasant auto repair experience with these guys. The muffler was literally falling off of my car. I looked on Angie's List and found the listing for Joe's Muffler. I pulled up to the garage and the mechanic waved me in. He gave me a really reasonable price which I accepted. He...
Joe's Muffler & Brakes
Request a quote
Reviewed in December 2012
The guy who came out made a lot of mistakes and use poor (even dangerous) workmanship. After re-plumbing the hot water heater, he either didn't notice or tell me that I also had a gas leak in the gas line to my hot water heater! I noticed it two days later, on my own, after he was long gone. In...
HITT PLUMBING CO
Request a quote
Reviewed in April 2011
The old downspout, that burst in heavy storms last winter, was custom made of welded metal. It had a welded, angular jog to get around a plumbing access opening in the wall. The new ABS downspout has a pre-fab rounded elbow at the top and a straight pipe to the ground. The cost of a new...
Iselt Handymen Services
Request a quote
Reviewed in March 2009
Luis is VERY punctual. For the estimate, he arrived an hour earlier than expected. The day of the job, I found him outside, an hour earlier, working on the car damage to the fence. Luis & his assistant worked quickly, fastening, welding, & painting.
5 Star Wrought Iron
Request a quote
Reviewed in November 2008
Estimate was $6,750. I received several estimates from other companies, some lower, but this was just a job to them. Mitch was cheerful & creative. He could see that because of my disability, this job had to be done right. Both high & low power electrical circuits also had to be run. After...
California Electronic Gates
Request a quote
Reviewed in November 2005
ON THIS PARTICULAR VISIT MY EXPERIENCE WAS VERY GOOD, I HAD A LEAK IN MY EXHAUST, THEY LOCATED IT IN A PART OF MY EXHAUST THAT WAS NOT LEGALLY REQUIRED TO BE THERE, SO THEY CUT IT OUT AND WELDED IN A NEW SECTION OF PIPE, ALL WITHIN HALF AN HOUR.
LA TORTUGA AUTO REPAIR
Request a quote

Get matched with top welders in Culver City, CA

There are 8 highly-rated local welders.

Need a pro for your welding project in Culver City, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Culver City, CA

Find Welders in Culver City

808

808

Veza Construction

Veza Construction

GT Steel Inc.

GT Steel Inc.

Metal master welding

Metal master welding

Alonso

Alonso

Rockman melts

Rockman melts

Bronze Wrought Iron

Bronze Wrought Iron

Canada Builders

Canada Builders

SS Welding Co

SS Welding Co

Handyman service

Handyman service

The Culver City, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Culver City? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Culver City Welding services on Angi who specialize in any of these tasks