Get matched with top welders in Torrance, CA

Q: What is the best way to cut plexiglass?

• <div><p>This all depends on the tools you have on hand and whether you&rsquo;re trying to cut a straight line or shapes. </p><p>The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. </p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How long does it take to cut up a hot tub?

• <div><p>Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Torrance, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Torrance, CA

*The Angi rating for Welding companies in Torrance, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Torrance, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on December 12, 2025

Reviewed in December 2025
They did an exceptional job. Painting the exterior of the fire station, LAFD Station 49, I highly recommend this company.
PAINT TIGERS
Request a quote
Reviewed in November 2025
Wonderful to work with; on time, efficient, knot, helpful and very nice! Can't best the price!
SAVU Garage Door Repair
Request a quote
Reviewed in September 2025
Jose & Crew did an excellent job on our Block Wall from beginning to end. We have working with J&J Masonry for many years and have trusted them on many other projects as well, from pavers to landscaping. Each job was done right at a competitive price. Would highly recommend J&J Masonry!
JJ Brothers Masonry Inc
Request a quote
Reviewed in August 2024
Every time I've needed repairs or updates, Hans has come through. No job is too small. I will definitely recommend Wirepros.
Wire-Pros
Request a quote
Reviewed in March 2024
Dan and his workers were extremely professional, he sent his technician within a couple of hours and repaired the issue for a fair price. Will use them for any future repairs.
Dan's Air Conditioning & Heating, Inc.
Request a quote
Reviewed in August 2023
I highly recommend Joe. He did an excellent job on our wrought iron fence. He was prompt, very responsive to my text, and answered all my questions. Ge was pleasant and very easy to work with. He did a quality job and was very reasonably priced. I would highly recommend JL Ironworks to anyone.
JL Ironworks
Request a quote
Reviewed in April 2023
They know how to handle the repair works
5 Star Landscaping
Request a quote
Reviewed in September 2022
Victor made this a very smooth, easy and expeditious process. Within the hour after making contact with him he was in my backyard taking down the damaged awning. He was quite an asset in fabric selection and color scheme matching. I was quite pleasantly surprised at how quickly he had my...
M.V. Custom Awnings
Request a quote
Reviewed in May 2022
The technician reglazed and repaired a bathtub. Very professional repairman. The work was excellent.
CALI REGLAZING INC
Request a quote
Reviewed in October 2021
I hired Ori to replace some baseboards & repair & paint our stair rail. He is very personal & responded immediately. The work was done beautifully and within the time frame he indicated. He has several really professional crews to tackle most jobs. We will ask Ori to convert our bar to a pantry...
E&A Star Construction Inc.
Request a quote

Find Welders in Torrance

H Q Welding Services

5.0(

)

Serving Torrance, CA and surrounding areas

Approved

In business since 2008

Emergency services offered

Customers say: Quick response

"I met with several companies. HQ Welding was most informative, provided options and left the property clean. Antonio was easy to work with. I would definitely refer them."

Response time1 day

10 neighbors recently requested a quote

Recommended by87%of homeowners

Request Quote

ASAP Structural Steel

4.0(

)

Serving Torrance, CA and surrounding areas

Approved

In business since 1970

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity and quality work. We are experts in our welding services and will do our best to keep you as educated as we can on your particular task or project. We look forward to working with you.

Response time1 day

2 neighbors recently requested a quote

Recommended by50%of homeowners

Request Quote

Bmans Welding Services

5.0(

)

Serving Torrance, CA and surrounding areas

Emergency services offered

"I would highly recommend Bmans welding services I’ve called him a few times for all my welding needs and always a great job from driveway gates ,custom doors, to custom tables . Always reliable and great pricing thanks BMANS WELDING ."

+29

Recommended by100%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"Justo is the best!!! He came to my house and welded a piece of metal that I needed for my hydraulic log splitter; he did a wonderful job with a perfect bead on all sides. I am more than satisfied with the work he did he did; a wonderful job!!! Not only that but he also educated me on what needed to be done and what was being done. He is extremely polite he was on time and his prices were very fair. I would not hesitate to hire him again. If you need a good professional welder and somebody that shows up on time and is very graceful please hire him he will do a good job for you as he did for me... I can verify that for sure."

+59

Recommended by100%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Mello Welding is terrific. I received a call back and a quick estimate. The work to cut out a rusty section of railing and weld a new section in place was professionally completed on time. I really appreciated how quickly they responded. Very satisfied."

+15

Response time2 days

Recommended by100%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"I couldn't be more pleased. Aaron did a fantastic job and extremely pleasant to work with. Already have ask him to provide a quotation on some additional work."

Am custom gate with ornaments and arch. Oil bronze color

+30

Recommended by85%of homeowners

Request Quote

US Home Developers Inc

4.5(

587

)

Serving Torrance, CA and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"The concrete and gate install went relatively quickly. The patio cover required permits which took some time. Once received, the patio went up quick and the planter brick repair was also quick. Overall a good partnership that I will hire again."

+45

Recommended by91%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"The installation team was excellent, even better than expected. Professional, punctual, efficient."

+11

Recommended by89%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2016

Free estimates

Emergency services offered

"Great service. Fair price. United iron kept us apprised of every step in the process. I would highly recommend Jesse and his company"

+139

Recommended by100%of homeowners

Serving Torrance, CA and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"We were so happy with the gate repair! We also planned a future project."

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 50

Welding questions, answered by experts

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

The Torrance, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Kelly Weimert
•
May 30, 2026May 30, 2026
How Much Does a Pipe Fence Cost? [2026 Data]
Pipe fencing is an extremely strong, durable option for containing horses and other livestock. This guide breaks down the factors that affect pipe fence cost.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Paige Bennett
•
May 2, 2026May 2, 2026
What’s the Difference Between Cast Iron and Steel Wood Stoves?
Looking for the best home heating option that doesn’t require electricity? Check out the pros and cons of cast iron versus steel wood stoves.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.