Get matched with top chimney inspectors in Carmichael, CA

Start by asking friends, family, and neighbors if they know any reliable roof inspectors. You can also ask contractors that you’ve worked with in the past—they often have a network of people they can reach out to. Once you do find a roof inspector you like, check their online presence, read customer reviews, and give them a call. 

Make sure they’re properly licensed and insured in your area. It’s also a good idea to hire inspectors licensed by both the National Roof Certification & Inspection Association (NRCIA) and the International Association of Certified Home Inspectors (InterNACHI).

No, you can’t inspect the roof yourself if you want to get your roof certified for your mortgage lender or insurance underwriter. You’ll need to get it inspected by a licensed professional. If you happen to be a licensed inspector, this means that commercial rules apply, and you’d need to get your Remote Pilot Certificate, just as you would if using the drone for another business purpose. 

However, if you want to use a drone to simply check out the roof, it’s considered recreational use. You won’t need your Remote Pilot Certificate, but you’ll still need to register your drone with the FAA and follow FAA and any state guidelines during the flight.

It’s possible to install your chimney cap in some areas, but it’s usually better to hire a professional. Before you attempt a DIY chimney cap installation, check to see if your local building department requires a permit. If it does, you should hire a professional to pull the permit and complete the work for you. Even if you don’t need a permit, getting up on your roof is dangerous, especially if you have an aggressive pitch or slippery roof material, like metal. Hiring a chimney professional guarantees the job is done correctly and keeps you safe from injury.

Asphalt shingles blister when air gets trapped between building materials, either within the layers of the shingle itself or in adhesives on the undersides of the shingles. As the roof heats up in direct sunlight, the trapped gas expands and creates a bubble in the roof. Eventually, the bubble can pop, leaving an exposed area of decking and underlayment.