Get matched with top concrete resurfacing pros in Arvin, CA

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.

Properly prepared and applied concrete resurfacing can last from 10 to 15 years. The longevity of resurfaced concrete depends on proper preparation as well as the fundamental condition of the original concrete. Depending on the application used to resurface the concrete, reapplying a protective sealer every two to three years can extend the life of the new concrete surface.

While you don’t technically need to grind concrete before resurfacing, it is very helpful. Grinding creates a rough, porous surface on the concrete, which gives the resurfacing material something to latch onto. Grinding your concrete before resurfacing can ensure that your resurfacing material lasts longer, reducing additional concrete resurfacing costs down the line.

Concrete overlay and concrete resurfacing are both concrete repair options. The terms are used interchangeably, and the meaning can vary from contractor to contractor. An overlay normally involves a thicker layer of new concrete over the old slab, which can last longer and add structural integrity to the old concrete. Resurfacing involves a thinner layer of concrete or resurfacing material and is for cosmetic upgrades only.