Get matched with top marble restoration pros in Alturas, CA

You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions. 

Since marble is a porous material, it is more prone to water spots than other countertop options. Fortunately, pure water doesn’t damage your marble, but if the water is acidic, it can cause stains or water spots. Resealing throughout the year can help increase marble’s water resistance, too.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

You can’t change the color of the stone, but you can update granite countertops without replacing them by painting them. Because granite is a porous material, you’ll want to seal them first before painting them so that the paint doesn’t hurt the surface. This is important because you don’t want to devalue your counters by damaging the original surface; even if you don’t like the color now, you or a new homeowner may want to remove the paint someday and return them to their original color. You can also cover them with