Top-rated deck cleaning pros.

Get matched with top deck cleaning pros in Pinetop, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your deck cleaning project in Pinetop, AZ?

Select your specific project to find the pro for you.

TRUSTED BY PINETOP, AZ HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon12
    Verified deck cleaning services reviews

Find Deck cleaning pros in Pinetop

Avatar for National Property Inspections
National Property Inspections
4.7(
7
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Pinetop, AZ and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"I chose them because the pitch man convinced me they were the best and they were $260  while others I called were $300 and adding termite inspection was $325 and his was included in the $260. On Monday morning at 8am of the planned inspection day, we found the 'current' owner had not turned the electricity on thus, the inspection could not take place. We were emailed the bill would be an additional $65 for the trip charge as it was a good 100 miles round trip and our error, not theirs. I felt bad so I accepted the additional charge. There went my saving a buck. Next we were emailed a new appointment day, Thursday at  11am. The inspector arrived Thursday at 8am.  Needless to say, it confused my whole day arriving three hours early. The inspector really did a good job, explaining everything to me so that I understood. Then he presented me with a $325 bill that we had agreed on and I paid. It being early in the morning I wasn't thinking clearly but later I called the business office and said  -  "Since we have an email stating 11am and the inspector showed up at 8am, your mistake, so I should get my $65 back from the trip charge when it was our mistake." The business office wanted nothing to do with that idea. The $65 was for the extra time and mileage, she said. What about the disruption to my schedule showing up at the wrong time. It didn't matter. Every other time I spoke with the woman in the office she was very kind but suddenly she wasn't any more.  Because they strictly wouldn't change the bill when it was their fault and because they are so far away, I will not use this company again.
"
NPI- Experience the Difference
Recommended by85%of homeowners
Deck Cleaning questions, answered by experts

Yes, Ipe wood is a popular high-end choice for pool decking. It repels water and is naturally slip-resistant. It's not susceptible to mold, mildew, or rot, either, so it lasts longer and is cleaner and more hygienic than other popular decking materials. However, remember that due to its status, it is a very high-cost wood, and you might find that an alternative would serve you just as well for significantly less.

In most cases, sanding an old deck before staining it is necessary to achieve a decent finish. If your old deck has a relatively new stain finish on it and you're only doing touch-ups, you can generally skip the sanding part. However, if your goal is to make the deck look and function better, sanding first is a must. 

To flatten a cupped deck board, start by ensuring it’s dry. Then, try flipping the board over so the cupped side faces down and reattach it. If that’s not possible, you can use screws to pull it tighter to the joists or plane the edges slightly to reduce the cup. It’s best to replace severely cupped boards.

Deck stairs should have at least three stringers rather than two. The recommended minimum width for stairs is 36 inches, and the International Association of Certified Home Inspectors recommends at least three cut stringers to provide sufficient support on wood decking stairs of this width. Generally, stringers should be a maximum of 16 inches apart for wood decking and 12 inches apart for more flexible composite decking.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The Pinetop, AZ homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.