Top-rated fencing pros.

Get matched with top fencing pros in Beaver Dam, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Beaver Dam, AZ?

Select your specific project to find the pro for you.

Find Fencing pros in Beaver Dam

Avatar for National Property Inspections
National Property Inspections
4.7(
7
)

Serving Beaver Dam, AZ and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"I chose them because the pitch man convinced me they were the best and they were $260  while others I called were $300 and adding termite inspection was $325 and his was included in the $260. On Monday morning at 8am of the planned inspection day, we found the 'current' owner had not turned the electricity on thus, the inspection could not take place. We were emailed the bill would be an additional $65 for the trip charge as it was a good 100 miles round trip and our error, not theirs. I felt bad so I accepted the additional charge. There went my saving a buck. Next we were emailed a new appointment day, Thursday at  11am. The inspector arrived Thursday at 8am.  Needless to say, it confused my whole day arriving three hours early. The inspector really did a good job, explaining everything to me so that I understood. Then he presented me with a $325 bill that we had agreed on and I paid. It being early in the morning I wasn't thinking clearly but later I called the business office and said  -  "Since we have an email stating 11am and the inspector showed up at 8am, your mistake, so I should get my $65 back from the trip charge when it was our mistake." The business office wanted nothing to do with that idea. The $65 was for the extra time and mileage, she said. What about the disruption to my schedule showing up at the wrong time. It didn't matter. Every other time I spoke with the woman in the office she was very kind but suddenly she wasn't any more.  Because they strictly wouldn't change the bill when it was their fault and because they are so far away, I will not use this company again.
"
NPI- Experience the Difference
Recommended by85%of homeowners
Avatar for Hampton Enterprise LLC
Hampton Enterprise LLC
3.7(
9
)

Serving Beaver Dam, AZ and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."
Additional Photos
Additional Photos
Recommended by60%of homeowners
Fencing questions, answered by experts

The average cost to install a wrought iron fence is around $3,150, with typical project costs ranging from $470 to $10,500. The final price can vary significantly based on several factors, including the fence's total length and height, design complexity, metal thickness, and your property's topography.

For materials alone, you can expect to pay around $25 to $35 per linear foot. When including installation, the cost is typically between $50 and $70 per linear foot.

Additional factors that can influence the total cost include:

  • Custom designs, decorative flourishes, gates, and columns

  • Labor costs in your area

  • The need for permits

  • Land preparation, such as old fence removal, tree or bush clearing, and land grading

For an accurate estimate, it is best to consult a professional fence installer with the specific measurements and design requirements for your project.

The cheapest farm fences are typically wire fences, which cost less to install than traditional lumber fences. Barbed wire is one of the most inexpensive options due to its simple materials, making it a good choice for low budgets. It is suitable for confining docile animals in large spaces, as it provides a visual barrier and a mild deterrent. Other options like hog wire and woven wire fences are also cost-effective because they require less lumber than a full wooden fence. These types of wire fences are strong, long-lasting, and relatively easy to repair, though they are often considered less aesthetically pleasing than wood.

For a chain link fence, the ideal distance between fence posts is 6 to 10 feet apart. Measure carefully to ensure even spacing, and resist the temptation to extend the distance more than 10 feet. Doing so could impact the stability of your fence.

The depth of the fence posts depends on the height of your fence. If you’re installing a 6-foot fence, then digging 2-foot-deep holes for the fence posts will help ensure a secure installation. However, if you’re installing an 8-foot fence, the posts will need to be deeper than 2 feet to support the structure properly. Also, consider how far apart the fence posts should be to provide adequate support.

Vinyl and chicken wire are two of the best and most affordable materials for a DIY garden fence. Vinyl is a great option because it is cost-effective, easy to work with, and effective at keeping pests out. A vinyl fence can cost as little as $15 per linear foot, especially if you install it yourself. Chicken wire is even more budget-friendly, costing as little as $2 per linear foot. While chicken wire is more affordable, vinyl is a better choice if privacy is a concern. You can also add chicken wire on top of a vinyl fence for extra security.

The Beaver Dam, AZ homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.