Get matched with top masons in Bonanza, AR

Cutting stone comes with a number of safety hazards. First and foremost, if you’re not comfortable with the equipment required to cut stone, including blades and grinders, you could easily injure yourself. The heavy machinery also poses a risk to your ears if you don’t wear proper ear protection; similarly, you need to wear eye protection to keep debris from irritating your eyes.

However, the biggest risk from cutting stone comes from the stone dust. When breathed in, stone dust can be a huge hazard to your lungs. Always wear a face mask when cutting stone to prevent inhaling stone dust, and thoroughly clean the work area when you are finished.

To avoid injury, we recommend hiring a stone-cutting professional, rather than attempting this job yourself.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Most of the time, you don’t need to seal brickwork and can save that money for another area of home improvement. But if your brick is cracking or you live in an area with a lot of excess moisture (either in terms of rain or freezes), sealing can extend the lifetime of your home. But, make sure you use a breathable sealant, like siloxane, to allow the moisture to evaporate on its own.

Yes, brick houses are better insulated, because the bricks slow down the passage of air from the outside to the inside and vice-versa. This helps to stabilize the internal temperature of the home. When combined with proper residential insulation, brick houses are more efficient and better insulated than other types.