Get matched with top excavation pros in Bay, AR

How deep your septic system needs to be into the ground depends on several factors. In extremely cold environments, the tank needs to rest below the maximum frost line, which can be up to six or eight feet deep. The standard burying depth for most systems is between a few inches and four feet below ground level. Depth can also depend on the slope of the landscaping and other property variables. 

A crawl space can be as little as 42 inches below the grade of your house, but this is not always recommended in flood-prone areas. At a minimum, there must be at least 16 inches of clearance between the ground and the floor joists to access the space in an emergency.

Trenching is not the same as boring. Boring uses a drill to make a tunnel for underground utilities, but trenching involves digging with an excavator, trencher, backhoe, or shovel. Boring is more precise and expensive, and it’s best for installing utilities underneath buildings, roads, and bodies of water. Trenching is simpler but can cause more disruption to landscaping and ecosystems.

The cost to drill a well ranges, but for a well that’s roughly 150 feet deep, you could spend approximately $5,500. However, prices can fluctuate substantially due to factors like geological conditions, local regulations, and variations in drilling methods. For a more precise quote tailored to your location, research local well-drilling professionals in your area.