Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Alexander, AR

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Alexander, AR?

Select your specific project to find the pro for you.

Find Metal fabricators and restorers in Alexander

Avatar for Red David Renovations

Red David Renovations

7041 Westshore Ave
5.00(
2
)
Approved Pro

Red David Renovations

7041 Westshore Ave
5.00(
2
)
Approved Pro
18 local quotes requested
18 years of experience

Red David Renovations is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"I was very pleased with this contractor. He listened to want I wanted and what I needed."

Estelita M on January 2025

Red David Renovations is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"I was very pleased with this contractor. He listened to want I wanted and what I needed."

Estelita M on January 2025



Avatar for Parker Handyman

Parker Handyman

5.00(
6
)

Parker Handyman

5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Our mission is to be a contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"He is awesome. He worked consistently an exceeded our expectations. He and his crew worked well together and worked tirelessly until the fence was completed. They cleaned up after and the fence looks great. He has amazing work ethics."

Jan M on September 2024

Our mission is to be a contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"He is awesome. He worked consistently an exceeded our expectations. He and his crew worked well together and worked tirelessly until the fence was completed. They cleaned up after and the fence looks great. He has amazing work ethics."

Jan M on September 2024


Fuller's Welding Services. LLC

No reviews yet

Fuller's Welding Services. LLC

No reviews yet

Over 15 years of experience in Aluminum and Steel fabrication and welding. Specialties in aluminum boat repair, fences, gates, and trailers. Give us a call for a free estimate.

Over 15 years of experience in Aluminum and Steel fabrication and welding. Specialties in aluminum boat repair, fences, gates, and trailers. Give us a call for a free estimate.


Avatar for Case Welding and Machining

Case Welding and Machining

1715 Jackson Drive
No reviews yet

Case Welding and Machining

1715 Jackson Drive
No reviews yet
Free onsite estimate

Case Welding & Machining is a full service fabrication that offers a wide range of capabilities to meet any jobs need. From weld repairs on household equipment to fabricating/machining precision parts and equipment we can handle any needs. With over 10 years combined experience in a wide range of industries, no job is too small or too big!

Case Welding & Machining is a full service fabrication that offers a wide range of capabilities to meet any jobs need. From weld repairs on household equipment to fabricating/machining precision parts and equipment we can handle any needs. With over 10 years combined experience in a wide range of industries, no job is too small or too big!


Crew of Jacks

73 Lewisburg Road
No reviews yet

Crew of Jacks

73 Lewisburg Road
No reviews yet
Emergency services offered

We are The Crew of Jacks our business is owner operated with a wide variety of skills to fix just about any everyday break down. Together we have over 20 years experience in vehicle paint, body work and mechanics along with home repairs, home improvements and home maintenance. If you can drive it or live in it we are your fix it crew when you need help.

We are The Crew of Jacks our business is owner operated with a wide variety of skills to fix just about any everyday break down. Together we have over 20 years experience in vehicle paint, body work and mechanics along with home repairs, home improvements and home maintenance. If you can drive it or live in it we are your fix it crew when you need help.



The Blackwood Co does any metal job you need! From steel to aluminum, boat repairs, fence work, and custom fabrication jobs. If you can think it, we can weld it!


Precision Welding Services

6 Dixie Dr
No reviews yet

Precision Welding Services

6 Dixie Dr
No reviews yet
6 years of experience

Precision Welding Services specializes in welding and fabrication. On site welding, stainless steel, aluminum, and X-Ray certified. As a new business, Precision Welding Services is determined to give customers the best results that reflect years of quality welding experience. We are a small business and strive to satisfy! Give us a call today!

Precision Welding Services specializes in welding and fabrication. On site welding, stainless steel, aluminum, and X-Ray certified. As a new business, Precision Welding Services is determined to give customers the best results that reflect years of quality welding experience. We are a small business and strive to satisfy! Give us a call today!


Encore Steel Buildings

7101 W 12th St
2.00(
1
)

Encore Steel Buildings

7101 W 12th St
2.00(
1
)
16 years of experience

Encore Steel Buildings specializes in customizable prefabricated steel building kits for commercial, agricultural, industrial, and residential use. We offer complete, cost-effective metal building kits to fit your budget. These are pre-engineered metal buildings of the highest quality, backed by industry-leading warranties. Because we have over 30 years of experience and we only use 100% American steel, that makes us your number one choice for components and pre-engineered steel buildings.

"Save yourself grief and avoid this company. I am an owner-builder (36x60 shop) and was connected with Encore via the broker I used to purchase the kit (The Steel Builder, Chico California: avoid this company too). Below are a few of the issues. Promised repeatedly it would be a five- to six-week delivery time. Actual was more than two months. First delivery was incomplete (no siding or trim). I was not provided a master manifest and delivery schedule, and therefore was not aware of what was missing. Contacted Encore after about six days to enquire on siding. Many components (about 5%) were mis-marked (didn’t match plans) and lengths of several did not match their labels. A few of the purlin weld tabs on the rigid frame were welded to the wrong side of the mark; about 3/8 inch off. Several items, such as gable end angle to support siding, were not addressed in plans: we fabricated substitute supports from extra base angle. One of the column base plates was not square with the column (frame line 2). This affected siding and ridge alignment, roof sheeting, eve overhang, etc. Only way to correct this is with shims, which the county inspector said would need to be engineered into the plans. Siding took an additional two weeks to receive, which required me to extend the rental of two scissor lifts ($800 cost). Ridge caps did not arrive until the structure was nearly complete; had to buy $200 worth of tarps to protect exposed insulation from rain. Trim and soffit components. Received partial delivery with unmarked components (they are supposed to be labeled to match the plans). The driver handed me a stack of sticky labels and it took ½ day to figure out where everything went. The building is now done, lift equipment is now gone, and I’ve still not received soffits and eve trim. Comms: Encore representative Ric Solis did what he could to patch things up, but had been thrown into the equation late in the transaction (the original guy left the company). Lastly, I was looking for a US-manufactured building and was originally told this kit was would come from Atwater, California. Ultimately, the rigid frame and components came from Texas but were manufactured in Mexico. I should have asked the specific question, "Is this made in USA?""

Chris C on December 2020

Encore Steel Buildings specializes in customizable prefabricated steel building kits for commercial, agricultural, industrial, and residential use. We offer complete, cost-effective metal building kits to fit your budget. These are pre-engineered metal buildings of the highest quality, backed by industry-leading warranties. Because we have over 30 years of experience and we only use 100% American steel, that makes us your number one choice for components and pre-engineered steel buildings.

"Save yourself grief and avoid this company. I am an owner-builder (36x60 shop) and was connected with Encore via the broker I used to purchase the kit (The Steel Builder, Chico California: avoid this company too). Below are a few of the issues. Promised repeatedly it would be a five- to six-week delivery time. Actual was more than two months. First delivery was incomplete (no siding or trim). I was not provided a master manifest and delivery schedule, and therefore was not aware of what was missing. Contacted Encore after about six days to enquire on siding. Many components (about 5%) were mis-marked (didn’t match plans) and lengths of several did not match their labels. A few of the purlin weld tabs on the rigid frame were welded to the wrong side of the mark; about 3/8 inch off. Several items, such as gable end angle to support siding, were not addressed in plans: we fabricated substitute supports from extra base angle. One of the column base plates was not square with the column (frame line 2). This affected siding and ridge alignment, roof sheeting, eve overhang, etc. Only way to correct this is with shims, which the county inspector said would need to be engineered into the plans. Siding took an additional two weeks to receive, which required me to extend the rental of two scissor lifts ($800 cost). Ridge caps did not arrive until the structure was nearly complete; had to buy $200 worth of tarps to protect exposed insulation from rain. Trim and soffit components. Received partial delivery with unmarked components (they are supposed to be labeled to match the plans). The driver handed me a stack of sticky labels and it took ½ day to figure out where everything went. The building is now done, lift equipment is now gone, and I’ve still not received soffits and eve trim. Comms: Encore representative Ric Solis did what he could to patch things up, but had been thrown into the equation late in the transaction (the original guy left the company). Lastly, I was looking for a US-manufactured building and was originally told this kit was would come from Atwater, California. Ultimately, the rigid frame and components came from Texas but were manufactured in Mexico. I should have asked the specific question, "Is this made in USA?""

Chris C on December 2020

Showing 1-10 of 40
Metal Fabrication and Restoration questions, answered by experts

Professional metal fabricators usually charge around $70 per hour. Three of the largest cost factors are the size and complexity of the project and the price of materials. The type of metal can impact the cost as much as the intricacy of the metal fabrication you want done. Another cost factor is your geographic location, as labor and materials can vary widely depending on the cost of living where you live.

The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. 

Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. 

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Since cesspits must be watertight to prevent leakage and contamination, so they’re typically constructed from one of a few tough materials. Most cesspits are made from fiberglass, concrete, polythene, or steel. Each of these materials carries certain advantages—fiberglass, for example, is resistant to corrosion but may be more prone to cracking if it’s at high capacity.

Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.

The Alexander, AR homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.