Get matched with top welders in Tanner, AL

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: What are the most common types of welding?

• <div><p>Welders use a variety of methods in their trade. Different types of welding are better suited for different purposes and contexts. For example, stick welding is a versatile form suitable for most metals and alloys. The most common types of welding include:</p><ul><li><p>Stick welding: $100&ndash;$1,000</p></li><li><p>Metal Inert Gas (MIG) welding: $250 and up</p></li><li><p>Tungsten Inert Gas (TIG) welding: $250 and up</p></li><li><p>Gas welding: $150 and up</p></li><li><p>Forge welding: $15&ndash;$25 per hour</p></li></ul><p></p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Tanner, AL?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Tanner, AL

*The Angi rating for Welding companies in Tanner, AL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Tanner, AL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on August 12, 2025

Reviewed in August 2025
I would recomend C&K Trucking! Very good company will use again.
C & K Dirt Works
Request a quote
Reviewed in April 2025
Chris and his partner did quite a bit of masonry on our outside and the work was excellent, he also looked for additional spots that needed repair. Chris is an excellent communicator and kept me informed from the time we set the original date until the work was completed. I would hire miller...
Miller Masonry
Request a quote
Reviewed in August 2024
Raymond Martone is the dictionary example of professional craftsman, priced right, awesome detail to work. He did our entire four season room with diagonal cuts. Always on time, and friendly. He also makes great home made meatballs.
Tile by Raymond Martone
Request a quote
Reviewed in June 2024
Skilled craftsmen. Problem solvers. Reasonable rates.
JME Construction
Request a quote
Reviewed in June 2024
Josh did an awesome job fabricating a new trolling motor mount for my aluminum boat. Fast , quality work, and at a good price.
Dias Welding, LLC
Request a quote
Reviewed in November 2023
did a great job in replacing our entire duct system in a crawlspace, thoroughly cleaned the coils, and hauled away all debris.
Berryhill Services, LLC
Request a quote
Reviewed in May 2022
Used this contractor on two different jobs. They did an excellent job both times. Always cleaned up the area after the service.
Molina's Tree Service
Request a quote
Reviewed in December 2021
I had several projects. 1. new wooden gate and front yard fence. 2. new dryer vent 3. new door to crawal space 4. exhaust pipe for wood stove. All work was quality work and completed within four days. I am very please and highly recommend them.
Stephens Maintenance & Repair, LLC
Request a quote
Reviewed in March 2021
John was excellent to work with. He provided excellent service and a quality welding job for me. His cost were very reasonable. I highly recommend him.
Calvarese Welding
Request a quote
Reviewed in September 2019
Work went quite well. Job took 3 days. Tore out 10 year old fencing which was here when we bought the house and disposed of all remnants. Next day new posts went in. 3rd day all spans and pickets went in. Gate added. They use 16’ spans which are staggered between posts every 8’ which added a lot...
FenceMasters LLC.
Request a quote

Find Welders in Tanner

Dias Welding, LLC

4.8(

)

Serving Tanner, AL and surrounding areas

Approved

Super Service Award Winner

In business since 2022

Free estimates

Emergency services offered

"Amazing craftsman, always kept me informed on the progress. Beautiful work! We will be having Josh do our future railing to our back porch. Worth every penny."

+56

Response time2 days

2 neighbors recently requested a quote

Recommended by84%of homeowners

Request Quote

Southern Mobile Welding Repair and Services

5.0(

)

Serving Tanner, AL and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"Peersonnable owner of business with own mobile equipment and travels large upper portion of Alabama. Happened to be near my town ion day we connected via text and he reliably appeared at decided upon time at end of day. Stayed until job completed and even was kind enough to halpme with a metal gate repair for free. Highly recommend service, knowledge and reliability. Charlotte"

Response time11 hrs

Recommended by100%of homeowners

Request Quote

Hawkins Welding

New to Angi

Serving Tanner, AL and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

We take great pride our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Response time10 mins

Request Quote

Christian Wilson

New to Angi

Serving Tanner, AL and surrounding areas

Approved

I'm a husband, father of five children devoted Christian. Here to be the best I can be everyday. Built with honesty, integrity and a high demanding work ethic.

Request Quote

Luke Hudson Mobile Welding

5.0(

)

Serving Tanner, AL and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"A true professional that shows skill in what he is doing at a competitive price. There couldn't have been a better job done on the work that was needed. I would definitely recommend to anyone needing welding done!"

28 neighbors recently requested a quote

Serving Tanner, AL and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Extremely easy to coordinate and work with. Honest, dependable, professional and self-sufficient. The experience in working with Pro Arc was outstanding in every facet. Coordinating the project was done with email / texting with timely responses. On the agreed work day and at the agreed time, Pro Arc showed up, had prepared all the needed brackets, all all the supporting materials needed for the job and did the work quickly & efficiently - for the agreed price. This small business is simply excellent."

Response time4 days

Recommended by100%of homeowners

Request Quote

Hdz mobile Welding & Fab

4.3(

)

Serving Tanner, AL and surrounding areas

Free estimates

Emergency services offered

Small jobs welcome

"I told Gustavo I was more interested in quality than speed. Quality I got. He exceeded my expectations. If you need a job done that involves welding, this is the place to call."

+15

1 neighbors recently requested a quote

Serving Tanner, AL and surrounding areas

In business since 2015

Free estimates

Offers commercial services

"Mark was very professional and showed up on time and finished fast. Great work!!!"

Response time3 days

Recommended by100%of homeowners

Serving Tanner, AL and surrounding areas

In business since 2021

Free estimates

Offers commercial services

"They did a great job."

Recommended by100%of homeowners

Request Quote

Cassidy's Welding Repair

5.0(

)

Serving Tanner, AL and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"He is a great guy and I would recommend him."

Recommended by100%of homeowners

Request Quote

...

Showing 1-10 of 56

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Welders use a variety of methods in their trade. Different types of welding are better suited for different purposes and contexts. For example, stick welding is a versatile form suitable for most metals and alloys. The most common types of welding include:

Stick welding: $100–$1,000
Metal Inert Gas (MIG) welding: $250 and up
Tungsten Inert Gas (TIG) welding: $250 and up
Gas welding: $150 and up
Forge welding: $15–$25 per hour

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

The Tanner, AL homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.
Sara Coleman
•
Apr 6, 2026Apr 6, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.