Get matched with top welders in Ardmore, AL

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company&rsquo;s workshop.</p><p>Once you&rsquo;ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: Can you cut plexiglass by hand?

• <div><p>Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.). </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Ardmore, AL?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Ardmore, AL

*The Angi rating for Welding companies in Ardmore, AL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Ardmore, AL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on September 20, 2025

Reviewed in September 2025
????? Lily Rose Excavation did an outstanding job! Professional, reliable, and efficient from start to finish. The crew was on time, worked hard, and left the site clean and ready for the next stage of our project. Excellent communication throughout and top-quality results. Highly recommend...
Lily Rose
Request a quote
Reviewed in May 2025
BJ the owner of Thompson Home repair did an outstanding job in getting all the different things that I needed at my home. He went above and beyond getting things done quickly and going the extra mile with repairing things that he did not charge me for. The quality of work was superb and his...
Thompson Home Repair
Request a quote
Reviewed in May 2025
Nathan was very knowledgeable about what needed to be done to repair my deck properly. He and his crew were efficient and respectful. The cost of the repairs were very reasonable. I would definitely recommend using J & W Pools and Services and will consider them first on future projects.
J & W Pools and Services
Request a quote
Reviewed in October 2024
The technician was great but my soldering job left a lot to be desired. Ended up having a cracked fitting. They were on time a well prepared. I would hire them again.
Aqua Systems of Alabama
Request a quote
Reviewed in November 2023
did a great job in replacing our entire duct system in a crawlspace, thoroughly cleaned the coils, and hauled away all debris.
Berryhill Services, LLC
Request a quote
Reviewed in July 2022
Chris and his father, both experienced and skilled masons, repaired our front and rear brick steps. They were prompt, brought brick and mortar that matched our steps, and did a very professional job. I will use them again if the need arises, and certainly recommend them wholeheartedly to anyone...
Miller Masonry
Request a quote
Reviewed in June 2022
Since they don't do liner repairs they gave me the number of a diver with patching experience. He was here the next day, repaired the tear and cost was super reasonable
Clearwater Pools
Request a quote
Reviewed in May 2022
New Era Contracting is very professional, friendly and provides high-quality work. Great communication with homeowner! Has set the the standard for general contractors. Most highly recommended!!! A+
New Era Contracting
Request a quote
Reviewed in January 2022
Quick and very good job done looks good and it's working at this point
J&L Gutters
Request a quote
Reviewed in October 2021
Greg and his team went above and beyond. My roof was over 20 yrs old and they had to replace multiple pieces of plywood unexpectedly. The paint crew did an awesome job repairing a few holes as well. Highly recommend S&S Roofing! Competitive pricing and a personable crew.
S&S Roofing
Request a quote

Find Welders in Ardmore

Dias Welding, LLC

4.8(

)

Serving Ardmore, AL and surrounding areas

Approved

Super Service Award Winner

In business since 2022

Free estimates

Emergency services offered

"Amazing craftsman, always kept me informed on the progress. Beautiful work! We will be having Josh do our future railing to our back porch. Worth every penny."

+56

Response time2 days

2 neighbors recently requested a quote

Recommended by84%of homeowners

Request Quote

Southern Mobile Welding Repair and Services

5.0(

)

Serving Ardmore, AL and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"Peersonnable owner of business with own mobile equipment and travels large upper portion of Alabama. Happened to be near my town ion day we connected via text and he reliably appeared at decided upon time at end of day. Stayed until job completed and even was kind enough to halpme with a metal gate repair for free. Highly recommend service, knowledge and reliability. Charlotte"

Response time11 hrs

Recommended by100%of homeowners

Request Quote

Hawkins Welding

New to Angi

Serving Ardmore, AL and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

We take great pride our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Response time10 mins

Request Quote

Christian Wilson

New to Angi

Serving Ardmore, AL and surrounding areas

Approved

I'm a husband, father of five children devoted Christian. Here to be the best I can be everyday. Built with honesty, integrity and a high demanding work ethic.

Request Quote

Luke Hudson Mobile Welding

5.0(

)

Serving Ardmore, AL and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"A true professional that shows skill in what he is doing at a competitive price. There couldn't have been a better job done on the work that was needed. I would definitely recommend to anyone needing welding done!"

28 neighbors recently requested a quote

Serving Ardmore, AL and surrounding areas

In business since 2015

Free estimates

Credit card accepted

"Extremely easy to coordinate and work with. Honest, dependable, professional and self-sufficient. The experience in working with Pro Arc was outstanding in every facet. Coordinating the project was done with email / texting with timely responses. On the agreed work day and at the agreed time, Pro Arc showed up, had prepared all the needed brackets, all all the supporting materials needed for the job and did the work quickly & efficiently - for the agreed price. This small business is simply excellent."

Response time4 days

Recommended by100%of homeowners

Request Quote

Hdz mobile Welding & Fab

4.3(

)

Serving Ardmore, AL and surrounding areas

Free estimates

Emergency services offered

Small jobs welcome

"I told Gustavo I was more interested in quality than speed. Quality I got. He exceeded my expectations. If you need a job done that involves welding, this is the place to call."

+15

1 neighbors recently requested a quote

Serving Ardmore, AL and surrounding areas

In business since 2015

Free estimates

Offers commercial services

"Mark was very professional and showed up on time and finished fast. Great work!!!"

Response time3 days

Recommended by100%of homeowners

Serving Ardmore, AL and surrounding areas

In business since 2021

Free estimates

Offers commercial services

"They did a great job."

Recommended by100%of homeowners

Request Quote

Cassidy's Welding Repair

5.0(

)

Serving Ardmore, AL and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"He is a great guy and I would recommend him."

Recommended by100%of homeowners

Request Quote

...

Showing 1-10 of 53

Welding questions, answered by experts

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

The Ardmore, AL homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Jill Harness
•
Mar 6, 2026Mar 6, 2026
Soda Blasting vs. Sandblasting: Which Is Right for Your Project?
Both soda blasting and sandblasting use agitating media to clean or prepare surfaces for coating. This guide explains their applications and differences.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Metal Awning Pro
Find the best metal awning professional for your project. Learn what qualifications to check, questions to ask, and how to hire a reputable pro.