Get matched with top countertop and backsplash pros in Oneonta, AL

When installing an undermount kitchen sink in a granite countertop, use 100% silicone to secure the basin. If you’re worried your sink is too heavy, speak with a countertop professional about how to adhere the sink to the countertop without worrying about issues down the road. Sagging undermount sinks can be a common plumbing problem if they’re not properly adhered, so always make sure you’re using a high-quality material.

The frequency for sealing marble countertops depends on several factors, including the quality and color of the stone, the type of sealant used, and the amount of traffic the surface receives. Marble has a porous surface that requires sealing to maintain its shine and resist scratches. As a general rule, you should seal countertops at least once a year. However, for heavily used surfaces, like those in a busy kitchen or family bathroom, you may need to reseal them every three to six months. Conversely, countertops in a rarely used guest bathroom might only need resealing every few years.

There are many differences between solid surface and quartz countertops. Whether one is as good as the other will depend on what you value most in a counter. These two materials are nonporous, although quartz is more durable. Some people may prefer the look of quartz, although they’re both available in many different colors and designs.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.