Get matched with top paving pros in Leroy, AL

The driveway apron is a technical term referring to where a private driveway meets the public street. If there is a sidewalk in front of the house, the driveway apron is typically on the opposite side of the public sidewalk from the driveway itself.

Three inches is a great thickness for a residential asphalt driveway that sees minimal to moderate traffic from cars, SUVs, and pickup trucks. However, a thicker driveway can better withstand the weight of a heavier vehicle, such as a trailer or a recreational vehicle. If you drive a heavy vehicle on a thin driveway, you risk cracking and damaging it.

About 6 inches between the edges of each stone in the sequence is common. Rather than sticking to 6 inches, some people measure the length of the entire path and adjust the space between stepping stones a couple of inches wider or narrower than 6 inches to make sure the entire path fits the length perfectly without having to cut a paver at either end. Other people prefer a design with a 24-inch distance from the center of one stone to the center of the next stone, which matches the stride of an average-sized person.

Wet cutting is usually the preferred method. It controls dust, which helps protect your lungs and makes for a cleaner working environment. Plus, the water cools the blade, preventing overheating and prolonging its life while providing smoother, more precise cuts. The downside is the mess—water and asphalt sludge can be messy to clean. Dry cutting, though convenient if water isn’t available, creates a lot of dust, which can be harmful. This also increases the risk of blade damage due to overheating. So, if you have the option, wet cutting is the better method for most asphalt jobs.