Get matched with top fencing pros in Georgiana, AL

The most durable metal for a fence is wrought iron. With proper care, a wrought iron fence can last for centuries. This means regular resealing to stave off rust and corrosion, especially in coastal climates with salty sea air. In these environments, chain link and corrugated fencing tend to stand up better to the elements with fewer maintenance needs.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

When it comes to aluminum fence post depth, the posts should typically be about one-third of the length of the fence post deep into the ground. However, it's always best to check with your fencing manufacturer's recommendations to ensure you install it at the recommended depth for stability.

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.