Get matched with top affordable plumbers in Calvert, AL

You definitely can over-tighten toilet tank bolts. Unlike some other materials, porcelain can’t bend or flex, so when you over-tighten a screw into it, it could break against the added pressure. Only tighten them as much as needed to keep them in place and firm; any more and you could risk breaking the porcelain.

Outdoor plumbing issues are no less serious or urgent to fix than interior plumbing problems. These problems may require excavation and lawn repair due to the plumbing often being buried underground. The most common outside plumbing problems include:

• Clogged landscape drainage: $200–$1,000

• Clogged sewer lines: $60–$250 per linear foot

• Corroded or rusted pipes: $1,500–$15,000+

• Leaking drain lines: $200–$1,000

• Leaking water mains: $300–$4,000+

• Septic system failure: $600–$3,000+

• Tree roots in pipes: $200–$1,000

• Well pump failure: $350–$1,500

While plumber’s tape is a great solution for many plumbing problems, there are some times when it’s not the right product for the job at hand. 

You shouldn’t use plumber’s tape on pipe connections in any of the following scenarios:

• When connecting PVC pipes

• If the pipe has wide threads, as water can still leak through the space between the threads

• If the pipe has very tight threads, as the tape would prevent a proper connection

• If the pipe threads are damaged, which would prevent the tape from providing a watertight seal

If your predicament is similar to any of these, a licensed plumber can help you solve the problem.

When positioning a pot filler, it should be mounted at a height that allows for convenient access without obstructing the cooking area. A general guideline is to place it 18 to 24 inches above the stove. For a more customized height, measure your most-used pots and install the filler 5 to 10 inches above your tallest one. Regarding horizontal placement, while centering the pot filler can be aesthetically pleasing and ensure it reaches all burners, it is often safer to install it to the left or right of the cooking surface. This placement helps you avoid reaching over a hot stove and reduces the risk of the filler itself getting hot from a large boiling pot. If you do choose to center it, be careful to avoid burns.