Top-rated sandblasting pros.

Get matched with top sandblasting pros in Bremen, AL

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Bremen, AL?

Select your specific project to find the pro for you.

TRUSTED BY BREMEN, AL HOMEOWNERS

  • Average homeowner rating star icon4.9
    Average homeowner rating
  • Verified reviews icon55
    Verified sandblasting services reviews

Find Sandblasting pros in Bremen

Avatar for Maries cleaning service and pressure washing
Maries cleaning service and pressure washing
4.9(
48
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Bremen, AL and surrounding areas

In business since 2015

Free estimates

Emergency services offered

"Mostly well, but the patio was left wet with spotting and debris from his mop. I was told to let the rain wash it off. However, no rain so I had to scrub the debris off several days later with a push broom and hose. Under the spotting and debris, the patio mildew was gone."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+16

Recommended by97%of homeowners
Showing 1-10 of 42
Sandblasting Services questions, answered by experts

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Costs depend on paint type, surface condition, labor, and required prep work for repainting.

The Bremen, AL homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.