Get matched with top deck staining pros in Soldotna, AK

Wood stains last anywhere from two to five years, depending on exposure to the elements, your local climate, the type of stain, and the surface it’s on. For instance, vertical surfaces last longer than horizontal surfaces. Some types of woods, like dense hardwoods, will require a recoat yearly, as they are too dense for the stain to absorb. In any event, apply a recoat every 2 to 4 years. As for storage, a can of unopened stain can last up to 5 years, though results may vary.

Beyond liquid rubber, homeowners can use sealants, stains, membranes, or tapes as waterproofing options. Oil-based or water-based sealants soak into the wood, creating a moisture-resistant barrier. Waterproofing stains—available in transparent, semi-transparent, and solid colors—add both protection and style to your deck. For heavy-duty waterproofing, deck membranes and waterproof tapes can be applied under the deck boards to direct water away from the structure below. Whatever method you choose, clean and prep the deck first to ensure the best, longest-lasting results.

Wood stain is not flammable after it dries. The solvent in wood stain is what causes the liquid form to be highly flammable, but the stain drying process involves the solvents dissolving, which leaves behind a non-flammable product on your wood project. Wood stain is, however, flammable before you apply it, so you should always store partially full cans and used wood stain rags away from sources of heat and open flames.

Yes, it is important to wash your deck before painting to ensure the paint applies well and adheres properly. While you don't have to use a pressure washer, it is one of the most efficient cleaning methods. Pressure washing can quickly remove dirt, wood fibers, and flaked paint, getting deeper into the wood than manual scrubbing. You can also clean the deck with a stiff broom and a cleaning solution. Regardless of the method, a clean surface is essential for good paint adhesion. Make sure the deck is completely dry before applying any paint.