How long does it take to build a fence?

• <div><p>If you hire a fence installer for the project, the <a href="https://www.angi.com/articles/how-long-does-it-take-to-build-fence.htm">time it takes to build a fence</a> is about 20 to 30 hours. Tackling the project yourself will take around 40 to 50 hours. It can take longer if you need to obtain permits, level the ground, remove the old fence, or remove a tree.</p><p> </p></div>

Get matched with top wrought iron workers in Houston, AK

Q: Do fence posts need to be below the frost line?

• <div><p>Yes, fence posts need to be installed below the frost line to ensure stability and prevent heaving caused by freezing and thawing cycles. The frost line is the depth at which soil freezes during winter. By placing posts below this line, often around 3 to 4 feet deep or as recommended for your specific region, you reduce the risk of the ground shifting, which can lead to leaning or unstable fences. Adequate depth provides better anchoring and helps maintain the fence's integrity, ensuring it remains secure and upright throughout changing seasons.</p></div>

Q: Does wrought iron fencing require a permit?

• <div><p>Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. <a href="https://www.angi.com/articles/how-much-does-building-permit-cost.htm">Building permits</a> for wrought iron fencing typically cost between <b>$150 and $500</b>, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you&rsquo;re installing wrought iron fencing on your property line. This type of survey can cost around <b>$500</b>, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.</p></div>

Q: What is the maximum slope you can build a fence on?

• <div><p>The maximum recommended slope on which you can build a racked or stepped fence is 45 degrees. After that, construction becomes quite tricky and may require the use of retaining walls or terraces to make the fenced area flatter.</p></div>

Q: Where can you buy wrought iron fencing?

• <div><p>You can buy wrought iron fencing from a trusted fence installation company near you. You could also opt to buy it privately from a homeowner who is interested in recycling their own wrought iron materials. Manufacturers stopped mass production of wrought iron as steel became more affordable to produce, so you likely won't find it in any local big box stores.</p></div>

Enter your ZIP and get matched with up to 5 pros

Verified Reviews for Wrought Iron Service pros in Houston, AK

*The Angi rating for Wrought Iron Service companies in Houston, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Wrought Iron Service needs.

*The HomeAdvisor rating for Wrought Iron Service companies in Houston, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Wrought Iron Service needs.

Last update on October 29, 2025

Reviewed in August 2022
We discovered that our sewer lines are cast iron and almost 50 years old. Drain Masters came out and inspected the entire sewer line from the house to where it connects to the city sewer line. They let us watch as the technician ran the camera down the line and pointed out where existing...
Drain Masters Inc
Request a quote
Reviewed in March 2020
The replacement went well. Failed imported combi was replaced with dependable cast iron boiler and indirect water heater.
Moore Heating and Cooling
Request a quote
Reviewed in July 2016
The sales rep was very thorough, but it did take 3 hours to iron out the bid. The installers, Josh and Trey, were very professional and timely. They had 7 windows and a door installed in 2 days. They kept the area clean and made sure to put down drop cloths to keep our floors clean. Very...
Renewal by Andersen of Alaska
Request a quote
Reviewed in August 2015
The backwater valve in this 1960's duplex was damaged by tree roots and was virtually useless which is pretty scarry in the east side of town where AWWU's storm and waste water systems are old and can back up during big rain events. On a limited budget for yet another project on this house I...
Circle Plumbing & Heating Inc
Request a quote
Reviewed in May 2015
It did not go well at all. Fred never installed the glass and he kept giving me excuses over the phone (supplier couldn't find my order, "I'll be up to install it next week," etc, etc). Finally, it was time to close on the house deal (this was AT LEAST 2 months after I'd ordered the glass) and...
AURORA WINDOWS & SUPPLIES
Request a quote
Reviewed in March 2015
Paid half up-front so materials could be purchased. Materials came in sooner than originally expected and Rebath was able to work around our schedule to start the job a month early. Their workers were punctual, courteous and had no problem working in the cramped space of a down-stairs 1952...
Re-Bath of Anchorage
Request a quote
Reviewed in February 2014
Our design was approved by the municipality only after requiring substantive and costly structural changes that would balloon this project way beyond our budget. The Squires never once communicated this to us. At that point we should have taken the time to re-evaluate our plan and find a...
Request a quote
Reviewed in November 2013
I've been going to Palumbos for six years. Up until about the few times, which have taken place over about 6 months, I thought they were one of the best and most consistent dry cleaners I've ever used. But they have recently fallen very short in terms of quality. I have received sweaters...
PALUMBO DRY CLEANERS
Request a quote
Reviewed in July 2013
I purchased a circa 1890 house with an original furnace. The HUGE furnace was terribly inefficient, and it would be very tough to find someone to maintain it, so I had to get it replaced. But the furnace itself and duct work in the basement were all wrapped in asbestos. I had meetings...
Alderson Environmental Contractor Inc
Request a quote
Reviewed in December 2012
Dave and his son quickly and accurately estimated the work, materials and cost for repairing a scam contractor's badly done flooring job and fireplace mantel, repairing stairs and removing old (out of code) wrought iron stair railings, covering a furnace exhaust pipe, expertly matching textured...
Jensen Construction
Request a quote

Find Wrought iron workers in Houston

Jensen Construction

Jensen Construction

Customers say: Quality work

Recommended by 98% of Angi customers

Jensen Construction is a small family owned company, in business in Anchorage since 1984. My business is under many categories on Angie's list. Almost all phases of construction. We take pride in the quality of work we provide and I, Dave Jensen take a hands on approach to ensure satisfaction. business lic #50121 specialty contractor lic# 15739

"Dave went above and beyond on our door installation, even coming up with some creative fixes for alignment problems that the door supplier created (SBS). He's very detail oriented, knowledgeable, and really wants you to be happy with his work. We plan to work with him again for other home projects!"

SARAH M on August 2022

"Dave went above and beyond on our door installation, even coming up with some creative fixes for alignment problems that the door supplier created (SBS). He's very detail oriented, knowledgeable, and really wants you to be happy with his work. We plan to work with him again for other home projects!"

SARAH M on August 2022

Wrought Iron questions, answered by experts

Yes, fence posts need to be installed below the frost line to ensure stability and prevent heaving caused by freezing and thawing cycles. The frost line is the depth at which soil freezes during winter. By placing posts below this line, often around 3 to 4 feet deep or as recommended for your specific region, you reduce the risk of the ground shifting, which can lead to leaning or unstable fences. Adequate depth provides better anchoring and helps maintain the fence's integrity, ensuring it remains secure and upright throughout changing seasons.

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.

The maximum recommended slope on which you can build a racked or stepped fence is 45 degrees. After that, construction becomes quite tricky and may require the use of retaining walls or terraces to make the fenced area flatter.

You can buy wrought iron fencing from a trusted fence installation company near you. You could also opt to buy it privately from a homeowner who is interested in recycling their own wrought iron materials. Manufacturers stopped mass production of wrought iron as steel became more affordable to produce, so you likely won't find it in any local big box stores.

If you hire a fence installer for the project, the time it takes to build a fence is about 20 to 30 hours. Tackling the project yourself will take around 40 to 50 hours. It can take longer if you need to obtain permits, level the ground, remove the old fence, or remove a tree.

The Houston, AK homeowners’ guide to wrought iron services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Aug 12, 2025Aug 12, 2025
How Much Does Commercial Sign Installation Cost? [2025 Data]
Discover commercial sign installation cost details, including average prices, key cost factors, and tips to save on your next signage project.