How Much Does Pool Removal Cost in Austin, TX? [2026 Data]

Austin, TX’s lower excavation and labor rates keep pool removal costs competitive for local homeowners. The average pool removal cost in Austin, TX, is $5,886, with most projects ranging from $4,905 to $7,848. In this guide, we’ll explore how key factors like your pool size, fill material, and local pro rates affect your total.

Pool Removal Cost Factors 

When budgeting for pool removal in Austin, TX, you’ll need to factor in your pool size, type, and material. The type of demolition, draining and emptying, and fill material will also impact your costs.

Type of Demolition

The cost of removing or filling a swimming pool depends on the method. You can completely demolish the pool or partially break it up before filling it in.

Pool Size

Like many projects, the bigger a pool, the more expensive pool removal tends to be. However, a smaller pool with a more complex design may be more expensive to demo than a larger pool with a simple shape and fewer features. Built-in steps or spas, waterfalls, and large decks and patios all add to removal costs.

For pool removal, expect to pay around $13.25 per square foot. The table below includes average costs based on pool dimensions:

Pool Type

Whether your pool is located above the ground or in the ground also makes a big difference. Here’s why:

• Aboveground pool: Much like the cost to install an aboveground pool, removing an aboveground pool is less expensive ($295 to $785) and faster (less than four hours) than removing an in-ground pool. Excavating base sand costs more, but you might get a discount if your metal pool frame is recyclable.

• In-ground pool: Expect to pay $2,450 to $9,800 for a partial fill-in of an in-ground pool or $3,950 to $15,700 for a full removal. Removing an in-ground pool requires heavy machinery, backfill soil, and engineering expertise to make the land safe for reuse.

In-ground pool removal costs are higher than aboveground pool removal costs. Here’s what to expect based on the size of your in-ground pool and whether you partially fill it in or fully remove it.

Pool Material

Pool material is a major cost factor during removal. Materials like gunite and concrete require additional demolition and disposal steps, making the labor more expensive. Below are the most common pool materials and their removal costs. 

• Vinyl: Removing a vinyl-lined pool costs $2,950 to $9,800. Full removal is required because a partial fill-in won’t work in this scenario. Before demolition, an engineer needs to inspect the vinyl liner's backing and declare it safe for removal.

• Fiberglass: Fiberglass pools cost $4,930 to $14,750 to remove. They require full removal since fiberglass pieces cannot be left in the ground, unlike concrete. However, the fiberglass shell may come out in one piece, making removal less expensive. If the shell comes out in sections, the removal cost increases.

• Concrete: Concrete pools are the most expensive to remove in full, so they're typically partially removed for $2,950 to $14,750. In most cases, a pool removal contractor will break apart the concrete and combine it with dirt to fill the pool cavity.

• Gunite: Gunite is a type of sprayable concrete. Removing a gunite pool also involves several steps, and the price range falls between $2,950 and $14,750.

Pool Draining or Emptying

Before the removal process, close your pool and drain the water. This takes about 24 hours and costs as much as $170, depending on the pool's size. You can save by draining the pool yourself with a small pump rental from a home improvement store for $40 to $70.

Check with a local pool removal company or your municipality for instructions on draining your pool in accordance with local regulations. Many municipalities allow drainage to the ground or street without permits. For areas requiring a permit, it’s best to leave the work to a pro to ensure you don’t violate local laws.

Type of Fill Material

Whether you're doing a full or partial fill, the cost to fill in your pool will depend on the material you’re using. To ensure the fill area settles and has proper drainage, a structural engineer should oversee the filling process.

• Gravel: This is the least expensive fill material at $4.90 to $7.85 per cubic yard. However, it doesn’t compact easily and can form sinkholes. It also isn’t good for support, so you won’t be able to build over it. Some homeowners use it as a base material to save on the cost of dirt.

• Dirt: Dirt costs $7.85 to $11.75 per cubic yard. You can opt to fill your pool with dirt alone, but it’s often mixed with a gravel base. Leave space on top of the dirt fill for landscaping topsoil.

• Concrete: This isn’t a common fill material due to its high cost. However, you can use broken-up concrete from a partial pool removal to help fill the space along with dirt.

Pool Removal Pro Costs

Pool removal labor averages $980 to $2,945. Austin, TX, pool removal pros calculate labor rates based on the time required to complete the project, the job's complexity, and material costs. Expect labor costs to be higher for heavy materials, like concrete, and full demolition. Vinyl pool removal costs are on the lower end of the range.  

Local building codes may require an engineer to oversee the pool removal and filling process. An engineer can ensure that your pool area has proper drainage, won't sink or swell, and will be buildable after pool removal. The cost to hire a structural engineer is $100 to $195 per hour.  

Additional Pros to Consider Hiring

Want to make use of your new outdoor space? Many homeowners hire a landscaper to transform the area into a garden, lawn, or hardscape. Landscapers in Austin, TX, charge $55 to $85 per hour, or $0.02 to $0.10 per square foot for larger projects.

Does Pool Removal Increase Home Value?

Pool removal can offer a 10% to 40% return on investment (ROI) for homeowners in Austin, TX. While a well-maintained pool can be an asset for the city’s long, hot swim season, an aging or damaged pool can reduce curb appeal and be expensive to maintain. Transforming an old pool into a usable garden, lawn, or entertainment space can increase your resale value and attract buyers who want a lower-maintenance outdoor space. 

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.