Get matched with top fireplace pros in Lingle, WY

The best location for a wood stove depends on your home's layout and venting options. For optimal heat distribution, a central location on the ground floor, such as the living room, is often recommended. If you have an existing, functional chimney, installing the stove there can simplify the venting process. Alternatively, placing the stove near an outside wall can make it easier to route a new chimney through the roof. For safety, ensure no combustible materials are near the stove. Building codes typically require 20 to 36 inches of clearance between the stove and any side walls.

You should use an angled brush to first paint the mortar lines, then go in with a high-density roller to evenly paint the bricks one at a time. You can also use a flat paintbrush to paint individual bricks, but a roller is faster and easier to use thanks to its longer handle and wider surface area for coating the bricks. To finish, go in with the paint brush for edges or hard-to-reach areas.

The project could take anywhere from one to five das, depending on the extent of the removal. Capping a gas line can be done on the same day, whereas completely removing a fireplace and chimney can span several weeks. Talk to your pro about the timeline and potential obstacles, like fireplace material, location, and potential structural issues.

You can use a fireplace with a broken damper, but only if the damper is in the open position. If not, your fireplace will not properly vent smoke outdoors. Never operate your fireplace if the damper is sealed shut and you cannot open it, as deadly smoke will quickly fill your home. If your fireplace damper is broken, have it repaired or replaced as soon as possible.