Top-rated stucco pros.

Get matched with top stucco pros in Moorefield, WV

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Moorefield, WV?

Select your specific project to find the pro for you.

Find Stucco pros in Moorefield

Stucco questions, answered by experts

The length of time shouldn’t matter much if you stick with lightweight Christmas lights and similar decorations. Those shouldn’t pose risks to your stucco. You should avoid attaching anything to your stucco that could fall because it’s too heavy, which may take part of the stucco with it. Some methods, like using double-sided tape or adhesive hooks, will naturally wear out over time and lead to falling lights, so don’t expect to leave these lights up year-round.

Solid, unpainted stucco shouldn’t suffer damage from dots of glue used for this task. If the stucco is dirty, you may notice slight marks when you heat and peel the glue away, but these aren’t permanent.

However, not all stucco walls are solid stucco. Some are “faux” stucco with a foam backing. This kind of stucco veneer is more susceptible to damage, including damage from hot glue. We don’t suggest attaching anything to these kinds of stucco walls, so make sure you check the stucco type before starting this project.

Masonry screws are the best option to be used on stucco. They’re thicker and made to penetrate harder surfaces like concrete and cinder blocks. Fluted masonry screws work the best because they create a stronger grasp thanks to the lines on their shafts. If you’re working on exterior stucco, use galvanized screws to prevent corrosion.

While your stucco repair professional can diagnose exactly what needs repair, it can be helpful to know what to look out for in the early stages to avoid significant reconstruction. Some common stucco repairs include: 

  • Cracks

  • Holes

  • Ceiling repair

  • Chimney repair

  • Stucco removal

  • Discoloration

  • Caulking

  • Water damage

  • Foundation repair

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

The Moorefield, WV homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.