Get matched with top deck maintenance specialists in Logan, WV

Typically, most residential wooden decks are designed to support approximately 40 pounds per square foot, including the deck’s weight and any items placed on it. While this is fine for typical use, it is usually not enough to hold the weight of a hot tub filled with water and people. To safely support a hot tub, your wood deck will likely require reinforcement. Therefore, it’s best to have a contractor or a structural engineer assess it before hot tub installation.

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.

Yes, you can absolutely replace just one damaged spindle as long as you can find a matching replacement. However, if multiple spindles are damaged or you can't find an exact match, you might consider replacing an entire section for a more uniform look and structural integrity.

There are several methods for attaching stair stringers to a deck. The best way is to bolt the stringers to the deck joists using three carriage bolts in a triangular pattern. This method offers the sturdiest fit for stairs that won’t budge. Alternatively, attach the stringers to the deck rims using lag bolts or to the posts using adjustable slope hangers.