Get matched with top door pros in Davis, WV

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

When choosing a door for the space between your garage and house, steel is your best bet for fire safety. While wood—and sometimes glass—doors are common, they have lower fire-ratings. Fire-rated steel doors can withstand flames for up to three hours—double what wood can manage (90 minutes). Glass, while non-combustible, can crack under extreme heat. Steel may cost more, but it also offers the best protection. Steel isn’t the most aesthetically pleasing choice, but as long as your door meets the International Residential Code (IRC) standards, it’ll do its job in protecting your family and home.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

You can use wood, metal, or plastic as a door shim, but keep in mind that wood will rot easier than the other two materials. Your local hardware store should have at least one type in stock. Alternatively, you can trim a piece of cardboard to fit underneath your door hinge and work as a temporary, makeshift door shim.