Get matched with top deck staining pros in Chattaroy, WV

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

It’s best to use an exterior latex acrylic paint to promote maximum adhesion to composite decking. This flexible paint type can better cope with the natural expansion and contraction that can occur with composite deck boards. Oil-based paints won’t adhere as effectively and are more likely to crack and peel as the boards flex. Testing whether your chosen paint will stick on an inconspicuous section or a spare board is a good idea.

Yes, pressure washing your deck before staining is a great idea because it clears the wood from any dirt, dust, and debris that could get in the way of solid stain coverage. Washing makes it easier to stain your deck and helps the stain grip the wood so it lasts longer. Pressure washers are faster and easier on your body than scrubbing your deck by hand.

You should wait three to six months after you buy it to paint pressure-treated wood. It needs time to dry from the chemicals applied to it. The paint will not adhere to the treated wood as well if it’s still wet from chemicals. To test the wooden boards, drip water onto them. If the wood absorbs the water, it’s ready for painting. If the water beads up, it’s not dry enough to paint yet. You can build your deck or fence while the treated wood is still wet, but you’ll need to paint it later.