A board on board fence is more expensive than other types of privacy fences. That’s because these fences require overlapping boards, which drives up material and labor costs. On average, a board on board fence costs 30% more than an average wood fence.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

If you come face-to-face with a wolf in your yard, chances are it will be afraid of you as a human. Make eye contact and get big—waving your arms to increase your size. Use noisemakers or air horns if you have them, or throw a few rocks around to discourage them from approaching you. If all else fails and the wolf does not retreat, back away slowly while maintaining eye contact and find safe ground, whether indoors or up a tree.