Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Johnson Creek, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Johnson Creek, WI?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Johnson Creek

Avatar for Advance Window cleaning and Power Washing
Advance Window cleaning and Power Washing
4.7(
14
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Johnson Creek, WI and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"I was very happy with Advance Cleaning’s work. I had water coming into my basement after a lot of heavy rainfall, so I knew I needed to deal with my gutters. Yanks was very responsive, scheduling was quick and easy, and he and his associate were on the job very fast! They worked nonstop on a very hot day and made sure all the downspouts were flowing freely before they finished. Everything works and looks really great after their work."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+36

Recommended by100%of homeowners
Ken Abrahamson Services
4.0(
99
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Johnson Creek, WI and surrounding areas

In business since 2003

Free estimates

Emergency services offered

"Ken was fantastic from start to finish. I hired him to remove an old basketball hoop, pour new cement, and install a new one. The job turned out to be much tougher than expected—the old cement was nearly impossible to break up and the clay ground was hard to dig deeper for the required dept —but Ken handled it like a pro, using a jackhammer and digging through hard clay soil without complaint. Despite the extra work and materials needed, he stuck to his original price even when I asked to pay him more, which speaks volumes about his integrity. He returned a few days later to assemble the hoop, and the final result was perfect—every measurement was spot-on. Ken went above and beyond, and I wouldn’t hesitate to hire him again. Highly recommended!"
nashotah
nashotah
nashotah
Recommended by47%of homeowners
Showing 1-10 of 33
Deck Maintenance questions, answered by experts

It is possible to pressure wash your deck, but it’s usually best to leave the work to a professional for two main reasons. First, power washers are expensive, and you can avoid high upfront costs by hiring a deck washing pro instead. Second, you must be careful to use the correct setting to avoid damaging your deck material. You can only clean soft woods like pine with a wide spray and a low pressure; otherwise, the water will leave unpleasant marks on your deck. Hard woods, composite material, and metal can stand up to increasingly higher water pressures.

To flatten a cupped deck board, start by ensuring it’s dry. Then, try flipping the board over so the cupped side faces down and reattach it. If that’s not possible, you can use screws to pull it tighter to the joists or plane the edges slightly to reduce the cup. It’s best to replace severely cupped boards.

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.

Building a deck without a permit could lead to fines for both the homeowner and the contractor. The exact penalties will depend on your state and municipal building laws. You might also be required to remove the deck and apply for a permit before you can build another. While it might be tempting to skip the permit to save a few bucks, it’ll cost you much more if you’re caught.

Building codes for deck railings can vary by location, so it's important to consult your local regulations before construction. Generally, a guardrail is required for any deck that is more than 30 inches above the ground.

For residential properties, the standard minimum height for a deck railing is 36 inches. However, some states and municipalities have stricter requirements; for example, California and Washington mandate railings that are at least 42 inches high. Therefore, a 42-inch railing is not considered too high and may be required in your area or chosen voluntarily for additional safety.

In addition to height requirements, codes also specify other safety features, such as the maximum spacing between balusters to ensure they are close enough to prevent a child from squeezing through.

The Johnson Creek, WI homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.