Get matched with top door pros in Denmark, WI

A slab door is a standalone door without a frame or hardware. A prehung door is a complete set that includes the door, frame, hinges, and sometimes the doorknob and lockset.

In most cases, a prehung door is the better and easier option to install, especially for DIY projects or exterior applications, as they often come pre-weatherproofed. They require fewer tools and less experience to install properly. Although prehung doors are heavier and have a higher upfront cost, the investment is often worthwhile for a complete upgrade that includes a new frame.

A slab door may be a better choice if you are on a tight budget, have a custom-sized wall opening, or only need to replace the door while keeping the existing frame. While the initial cost is lower, you will need to purchase all the hardware separately and do more DIY work to hang it, which may not result in significant time or money savings.

You can’t gauge the lifetime of a fire door like you could, say, an engine. Fire doors should be checked at least once every six months to ensure there are no signs of degradation like leaks, holes, water damage, termite damage, or anything else that might compromise the functionality of the door’s fire resistance. Check your smoke detectors while you’re at it.

A door frame is not the same as a door casing. A door frame is the framework surrounding the entire door that supports the area from which the door hangs. The frame is made up of multiple parts, including the door jamb, head, and sill.

Casing refers to the trim work located around the door frame. It connects the door frame to the wall with decorative trim.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.