Best holiday decorators near Cadott, WI

If you only need strands in safe and easy-to-reach locations and are sure of your electrical system, you can probably purchase and install lights yourself. To do this, carefully test your outlets to ensure there aren’t any sparks or other concerning issues. Your budget might also influence this decision, as going the DIY route can be significantly cheaper.

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

First of all, don’t shop for bargain lights—often, you’ll end up with a faulty or broken strand, full of dead bulbs or less-than-luminous brightness. Choose quality lights that will last you many years—LED lights have been known to last as long as 100,000 hours. Second, plan ahead and purchase lights for next year’s Christmas during this year’s post-holiday sales. Finally, have a vision and a plan—if you know the measurements of your home, including any windows, doors, and outside bushes you wish to light up, you should be able to only purchase the necessary lights and not more than you need.

Heavy amounts of snow could be a problem. In many climates, lots of snow on your rooftop can lead to freeze-thaw cycle that create ice dams, which can damage rooftops. But if you’re using shingle clips, this snow poses an additional problem: As it melts and freezes, it can easily dislodge clips you’ve placed on your roof.

You can clean snow off your roof after a fresh snowfall while it’s still lightweight, but brushing off snow can also dislodge your clips. If you get a lot of snow, then roof clips become less viable.