Get matched with top locksmiths in Big Bend, WI

One of the best tools for removing a stripped bolt is a handy pair of locking pliers. Locking pliers can usually grip onto screws with a broken, rounded, or stripped head and lock in place so that you can loosen even the most stubborn bolt that would otherwise remain hopelessly jammed.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.

A deadbolt differs from a regular lock in its design, construction, and security level. Regular locks are typically used for interior doors, such as for bedrooms and bathrooms, and provide minimal security. They are easy to install and use, often featuring a simple locking mechanism on the inside. In contrast, a deadbolt is one of the most secure locks you can install on an exterior door. Its internal construction is designed to withstand significant force, adding a crucial layer of security that can deter intruders. While deadbolts may be more expensive and complicated to install, they are cost-effective for the security they provide and are built to hold up to wear and tear.