Top-rated energy efficiency auditors.

Best energy efficiency auditors near Bancroft, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your energy efficiency auditing project in Bancroft, WI?

Select your specific project to find the pro for you.

Top-Rated Energy efficiency auditors in Bancroft - Updated Nov 2026

Avatar for Home Energy Solutions
Home Energy Solutions
4.7(
14
)
Home Energy Audit

Serving Bancroft, WI and surrounding areas

In business since 1992

Credit card accepted

"John was excellent to work with. Very thorough in his pre energy inspection as well with post inspection. Without John s work the insulation crew would have had a difficult time finding the problem areas. Highly recommend for ANY insulation work."
Response time9 hrs
Response rate91%
Recommended by90%of homeowners
Energy Efficiency Auditing FAQs, answered by experts

Installing weather stripping or upgrading to insulated panels can improve efficiency.

Motion-sensor lights use one watt while on standby and five watts while turned on. They’re usually on for one hour over a 24-hour period, bringing the total wattage to about 28 watts per day. LED lights use around 6.5 to 8 watts while on. If you leave an LED light on all night, with night ranging from 10 to 14 hours, you’re looking at using 65 to 112 watts a night. You can minimally cut your wattage in half by switching to a motion-sensor light.

A good SEER rating for an HVAC system is typically between 15 and 20. However, minimum requirements vary by location; HVAC systems in northern states must have at least a 14 SEER rating, while those in southern states need a minimum of 15. For the highest possible efficiency, look for units with a SEER rating of 21 or higher. It's important to remember that a SEER rating represents the maximum efficiency a unit can achieve, not the level at which it will operate at all times.

To determine the right size generator for your house, you should calculate the total wattage of the appliances and devices you want to power during an outage. List all essential items, note their start-up wattages, and add them together.

Here are some typical wattage requirements for common appliances:

  • Refrigerator: 600 watts

  • Large dehumidifier: 700 watts

  • Large window air conditioner: 1,400 watts

  • Water heater: 3,000 to 4,500 watts

  • Electric furnace: 5,000 to 25,000 watts

A 7,500-watt generator might be sufficient for essentials like a refrigerator, freezer, well pump, and lighting circuits. However, for high-demand items like a water heater or furnace, a whole-home generator is a better choice. A portable generator may be enough if you only need to power a few critical items.

While home square footage can offer a rough estimate, it is not always a reliable indicator. For reference, here are some typical generator sizes based on square footage:

  • 1,000 sq ft: 6–9 kW

  • 1,500 sq ft: 7–10 kW

  • 2,000 sq ft: 10–14 kW

  • 2,500 sq ft: 12–16 kW

  • 3,000 sq ft: 16–20 kW+

For the most accurate sizing, consult a professional who can calculate your home's peak and average power consumption and recommend the optimal generator.

Costs depend on the property size, audit complexity, and whether additional testing (e.g., blower door) is included.

The Bancroft, WI homeowners’ guide to energy efficiency auditing services

From average costs to expert advice, get all the answers you need to get your job done.