Get matched with top dishwasher installation pros in Baldwin, WI

You should deep-clean your dishwasher every month for optimal performance. A simple scrub down using a homemade vinegar liquid solution is all you need, but don’t use cleaners that aren’t for dishwashers. 

If your dishwasher needs repair, expect to spend between $50 and $100 or $100 to $200 per hour to hire a dishwasher repair technician to service your machine.

Treat hard water with water treatment tablets to keep your dishes from getting spotty in between washes. Drop one of these into your dishwasher monthly and run a basic cycle with the machine empty.

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

A dishwasher filter should be replaced every five years, depending on the manufacturer's recommendations and the frequency of use. The exact timing can vary based on factors such as the hardness of your water, how well you rinse dishes before loading them, and how often you clean the filter. Regularly inspect the filter for signs of wear and tear or damage. If the filter appears worn out, damaged, or excessively clogged despite regular cleaning, it should be replaced sooner.

The correct water temperature for your dishwasher depends on the washing phase. When water enters the machine, it should be around 120 degrees Fahrenheit, but no hotter than 150 degrees. During the wash cycle, the machine will heat the water to between 130 and 140 degrees. If your dishwasher has a sanitizing cycle, the water can reach a temperature of up to 180 degrees.