Get matched with top fencing pros in Alma Center, WI

Making a homemade pallet fence involves marking out the fence line and leveling the ground along it. Then, install metal or wooden fence posts that you slide the pallets on top of (two posts per pallet). Fasten them together with 2x4 wood boards that act as an extra layer, keeping the pallet fence secure.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

Posts for a horizontal fence should be no more than 6 feet apart. Wood pickets are not as strong when mounted horizontally as when mounted vertically. As such, the fence panels on a horizontal fence can’t cover the same span between posts as a vertical fence can. If you install the posts further apart on a horizontal fence, the fence will lose stability, making the boards more likely to sag.