Top-rated radon detection and reduction specialists.

Get matched with top radon detection and reduction specialists in Rochester, WA

Enter your zip and get matched with up to 5 pros

Need a pro for your radon detection and reduction project in Rochester, WA?

Select your specific project to find the pro for you.

Find Radon detection and reduction specialists in Rochester

Avatar for 5 Microns Inc.
5 Microns Inc.
4.9(
74
)
Radon Gas - Testing

Serving Rochester, WA and surrounding areas

Approved

In business since 2019

Free estimates

Small jobs welcome

"Pascal was very prompt in communication and coordinating the testing. The results were provided next day and he answered all my questions. I recommend 5 Microns Inc and will use their services in the future."
Vinyl sheeting asbestos test
Wall asbestos test
Asbestos air test
Mold and moisture testing
Mold air test

+32

Response time3 hrs
Response rate98%
Recommended by100%of homeowners
American Building Solution LLC
New to Angi
Radon Gas - AbatementRadon Gas - Testing

Serving Rochester, WA and surrounding areas

In business since 2014

Free estimates

Emergency services offered

Professional handyman services as well as Residential and Commercial property maintenance.\n\nWe specialize in room additions and full home remodels along with residential and commercial property electrical, plumbing, carpentry, and interior and exterior tenant improvements, re-keying, painting, landscaping, and all other property maintenance and construction services.\n\nProperty managers: we specialize in local handyman work and property maintenance needs.\n\nhttp://www.handymanintacoma.com/

 Kitchen, bath
 bathroom
 shower
Radon Detection and Reduction questions, answered by experts

No level of radon is technically safe, but since it is naturally present everywhere, it is impossible to avoid entirely. The average radon level in homes across the United States is 1.3 picocuries per liter (pCi/L). The Environmental Protection Agency (EPA) recommends taking action to reduce radon levels if your home's test results are between 2 and 4 pCi/L or higher.

The cost for a radon mitigation system typically ranges from $800 to $1,500, with an average around $1,000. The final price depends on several factors, including the size of your home, the severity of the radon issue, and the type of system required. Your home's foundation type also significantly impacts the cost. For example, sealing and ventilating an unfinished basement might cost around $4,600, while encapsulating a crawl space without a foundation slab can range from $1,500 to $15,000.

Radon enters your home when warm air begins to rise and exits through the roof, creating a vacuum that pulls cooler air from under the foundation. Part of that air is radon, which is an invisible, odorless gas that develops naturally when radioactive particles are deep within the ground. Those particles usually come from decaying matter in soil and rocks.

No, air purifiers are not an effective way to reduce or remove radon. Radon is a radioactive, inert gas that cannot be filtered by standard air purifiers, which are designed to capture particulates like dust and mold. While an air purifier can improve indoor air quality by removing other pollutants, it should not be relied upon for radon. The only effective solution for high radon levels is a dedicated radon mitigation system.

You can vent radon out of your house sometimes by simply opening a window, but it won’t remove the source, and will likely rise above recommended levels quickly. A professional will be needed to assess your home, and determine the best strategy for radon removal. Active radon sump pumps and soil depressurization systems are often used to forcefully vent the radon from your home.

The Rochester, WA homeowners’ guide to radon detection and reduction services

From average costs to expert advice, get all the answers you need to get your job done.