Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Pasco, WA

Q: What is the difference between metal casting and metal fabrication?

• <div><p>Metal casting involves creating a prototype and a mold into which metal is poured and allowed to cool and set up. Pieces are cast in molds, making the reproduction of many identical pieces more efficient for larger quantities. Metal fabrication involves creating pieces and welding them together into a larger project, involving more skilled manual labor than metal casting. Fabrication can be more cost-effective in smaller runs but can become less efficient for producing mass quantities of identical pieces.</p></div>

Q: How do you calculate welding costs?

• <div><p>The average cost to hire a welder is about <b>$300</b>, with an average rate ranging from <b>$65 to $125 per hour,</b> depending on their experience and the project type and size. Aside from labor costs, some other charges you&rsquo;ll need to pay include the cost of the welding material and the cost of the shielding gas that makes welding possible and safe. When you&rsquo;re interviewing welders for your work, you can ask for an estimate based on your project specifics. In some simple cases, like welding gas lines or common welding projects, local welders may charge a flat hourly rate with add-ons if necessary.</p></div>

Q: What materials are cesspits made from?

• <div><p>Since cesspits must be watertight to prevent leakage and contamination, so they&rsquo;re typically constructed from one of a few tough materials. Most cesspits are made from fiberglass, concrete, polythene, or steel. Each of these materials carries certain advantages&mdash;fiberglass, for example, is resistant to corrosion but may be more prone to cracking if it&rsquo;s at high capacity.</p></div>

Q: How many metal sheets will I need?

• <div><p>The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.</p></div>

Q: Do services include welding and installation?

• <div><p>Yes, many fabricators provide welding, assembly, and on-site installation to ensure structural stability.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Pasco, WA?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Pasco, WA

*The Angi rating for Metal Fabrication And Restoration companies in Pasco, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Pasco, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on October 28, 2025

Reviewed in November 2024
I got a quote to move a 2 bedroom duplex into a 3 bedroom house. They sent out a guy to go through the house to put together a quote. Right off the bat, they had the wrong form for doing a long-distance move. They were supposed to take pictures, but failed to do that. I was quoted $6,126 for the...
Big Al's Specialty Movers Inc
Request a quote
Reviewed in October 2020
They came to evaluate and came back the same day to cover open holes around bent pipes and replace plastic boots with metal ones.
TRI-CITIES ROOFING LLC
Request a quote
Reviewed in September 2016
Our installers, Prentice and Matt, were professional, quick, courteous, and knowledgeable. They were cleaner than I am while restoring our house. They had the job done within a day in 100+ degree heat, with no breaks. (You need to eat and keep hydrated, guys). We look forward to having the rest...
Renewal By Andersen
Request a quote
Reviewed in September 2015
Two men worked for 2 hours to clear a large portion of the overgrown weeds in our yard. I was at work, so my wife spoke with them. They were approximately 30 minutes earlier than expected, but called ahead as we requested. They were very friendly, polite, professional. They clarified what she...
Bill's Lawn and Landscape Inc
Request a quote
Reviewed in March 2014
I was on the HGTV website and got to looking at new countertops of formica and was taken to a "HomeAdvisor". It seemed like a good website and it gave me the name of a contractor in our area. I stopped short of hitting the "submit" and decided I would check the company out on Angie's list....
Steve Hastings & Sons
Request a quote
Reviewed in August 2013
This was a horrible experience. On the home page of the Tricities Property Management website there is a quote that reads "Your Investment is our Top Priority" this is the farthest from the truth. I dealt with Laura Juteau who was initially very professional, but as our business relationship...
Tri-Cities Property Management
Request a quote
Reviewed in August 2013
I don't know why the other reviewers had bad experiences. My experience with Mark Vincent and his foreman, Darrel, was superior. I provided a detailed statement of work and Mark went over the expectations thoroughly. Prompt quote within a couple of days. He was the least expensive of 3...
Vincent Construction
Request a quote
Reviewed in May 2013
I contacted NW Restoration and they came out and did an estimate. They wanted me to have an engineer look at the work that needed to be done which I did for an added $800.00. They then told me they couldn't guarantee the cracks would not come back but if they did they would work with me until...
North West Restoration
Request a quote
Reviewed in April 2013
As Bryon started the install he pointed out it would be cheaper to lay laminate in our dining area of the kitchen rather then tile.Bryon and Linda has saved us so enough money we will have our entire house except bedrooms and bathrooms replaced with laminate floor. Since we have him...
Air-Tight Remodeling
Request a quote

Get matched with top metal fabricators and restorers in Pasco, WA

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Pasco, WA?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Pasco, WA

Find Metal fabricators and restorers in Pasco

David

David

Campbell welding

Campbell welding

Architect Design Welding

Architect Design Welding

Fixall home services

Fixall home services

D.W. Swedes

D.W. Swedes

Independent Cylinder Head

Independent Cylinder Head

FusionWorks

FusionWorks

Iron Horse Garage

Iron Horse Garage

West Coast Welding

West Coast Welding

Cohoon Welding and Fabrication

Cohoon Welding and Fabrication

The Pasco, WA homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Pasco? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Pasco Metal fabrication and restoration services on Angi who specialize in any of these tasks