Get matched with top garbage collectors in Mccleary, WA

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

Garbage disposals are durable appliances that usually last at least eight years as long as you clean and maintain them. It’s relatively rare for a garbage disposal to break on its own, as most malfunctions happen due to user errors, like overstuffing the grinding compartment or damaging the blades by trying to dispose of metal or bone. Eventually, cracks or leaks could develop in the unit, which requires a full replacement. 

Your garbage disposal is not draining because it might have a clog due to food waste, a foreign object, grease, oil, fat, or it may have a broken motor. When water doesn't flush out of the disposal, that's a key sign that your disposal has a clog or needs repair. 

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.