Get matched with top drain cleaners in Asotin, WA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

For disposal clogs with standing water, use a sink plunger and place it over the garbage disposal drain. Push the sink plunger up and down the drain about six to eight times before lifting. If the sink drains, the clogged food particles are dislodged from the drain. If there’s still standing water, repeat the steps until the standing water clears out. 

If your dishwasher isn’t draining, some common causes include a clogged drain filter, drain hose, or air gap. Also, if you have a garbage disposal, a clog in the disposal can back up your dishwasher since they share plumbing, as can a clog in your kitchen sink’s plumbing. A handy DIYer may be able to figure out how to unclog a dishwasher, but you may need to call in a plumber if you can’t locate and clear the clog yourself.

If your drain doesn’t have metal crosshairs or crossbars, you should use a tub drain extractor. These tools create a grip on the drain so you can turn it using a 1/2-inch ratchet drive, drain key, or wrench. Your drain may not have crosshairs if it's old and broken.