Get matched with top concrete leveling pros in Washington, VT

If your epoxy application ended up a bit messy and left spills behind, there are several ways to clean epoxy off of a concrete floor. You can use a power washer with at least 3,000 PSI. However, it may be easier to use a scraping tool or an acidic cleaner, like vinegar, to remove unwanted epoxy. 

If the entire floor has epoxy and you want to remove just excess epoxy stains, these methods could still strip parts of the epoxy floor. Move carefully and in small areas to minimize damage, or call a pro for an expert finish.

Yes, concrete is significantly stronger than masonry, especially if the concrete pour includes reinforcements, like steel rebar. Concrete is a uniform material that can withstand compression, sheer force, and tensile force as long as it’s reinforced. Masonry involves the use of mortar or grout to connect individual building materials, like brick, stone, or tile. Mortar and grout are also reasonably strong and resist compression well, but they don’t come close to the strength of poured concrete.

The best time to pour concrete is mid-afternoon when temperatures often sit between 50 and 60 degrees, and you don’t expect rain for at least 24 to 48 hours. Avoiding direct sunlight in the peak afternoon hours can help reduce the risk of curing too quickly, as can avoiding pouring on hot summer days. Colder temperatures and rain can lead to slower curing times and weaken the concrete. If in doubt, especially if your concrete will provide structural stability, hire a contractor to determine the best time to pour.

The most common cause of concrete cracks is shrinkage when the concrete hardens and cures. The stress from the shrinkage exceeds the concrete’s strength. Concrete cracking can also occur when it experiences extremely cold or hot temperatures, such as a particularly harsh winter or a firepit built into a concrete patio.