Top-rated energy efficiency auditors.

Get matched with top energy efficiency auditors in Saxtons River, VT

Enter your zip and get matched with up to 5 pros

Need a pro for your energy efficiency auditing project in Saxtons River, VT?

Select your specific project to find the pro for you.

Find Energy efficiency auditors in Saxtons River

Avatar for Gabriel Hahn
Gabriel Hahn
New to Angi
Home Energy Audit

Serving Saxtons River, VT and surrounding areas

Approved

Emergency services offered

Small jobs welcome

Credit card accepted

I conduct energy audit tests for homes, whether they are colonial or brand new construction. I can recommend you various forms of weathersealant, thermal wrappings, and storm window techniques, saving you thousands in the form of long-term heat insulation tech-forward solutions.

Energy Efficiency Auditing questions, answered by experts

Yes, a dirty air filter can cause a higher electric bill. That’s because clogged filters make it harder for air to flow through your HVAC system, which forces it to work harder and use more energy. According to the U.S. Department of Energy, replacing dirty filters can save you between 5% and 15% in utility costs.

A good SEER rating for an HVAC system is typically between 15 and 20. However, minimum requirements vary by location; HVAC systems in northern states must have at least a 14 SEER rating, while those in southern states need a minimum of 15. For the highest possible efficiency, look for units with a SEER rating of 21 or higher. It's important to remember that a SEER rating represents the maximum efficiency a unit can achieve, not the level at which it will operate at all times.

Dryers are designed to use as little electricity as possible, but power is still required to run the motor that turns the drum and to heat an element that pumps hot air. Eco devices are available and may lead to cost savings in the long term, but you should run the figures before committing to an eco-friendly device as they are often much more expensive to purchase.

Motion-sensor lights use one watt while on standby and five watts while turned on. They’re usually on for one hour over a 24-hour period, bringing the total wattage to about 28 watts per day. LED lights use around 6.5 to 8 watts while on. If you leave an LED light on all night, with night ranging from 10 to 14 hours, you’re looking at using 65 to 112 watts a night. You can minimally cut your wattage in half by switching to a motion-sensor light.

DIY is possible with basic tools. Professional audits provide comprehensive assessments and tailored recommendations.

The Saxtons River, VT homeowners’ guide to energy efficiency auditing services

From average costs to expert advice, get all the answers you need to get your job done.