Get matched with top driveway gate pros in Rupert, VT

The obvious disadvantage of an automatic gate is that it runs on electricity. If the power goes out, it won’t open or close unless there’s a manual override. Many homeowners will need a backup generator so they don’t get stuck on either side of the gate, particularly when looking to park a vehicle. Automatic gates are also much more complicated than manual gates, with tech-heavy components that make them more expensive to repair.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.

While it is possible to install a manual gate yourself, it is generally not recommended. Professional installation is strongly advised, especially for automated or large driveway gates. Gates can be extremely heavy, sometimes weighing hundreds of pounds, which makes them bulky and dangerous to maneuver into place. Proper installation requires perfect positioning and balancing to ensure the gate swings smoothly and functions as intended. For automated gates, the wiring is also hazardous and typically requires a licensed electrician. Mistakes during a DIY installation can be costly, as materials alone can average around $1,000. Given the safety risks and the difficulty of achieving a proper setup, it is best to hire a professional gate installer.