Get matched with top furniture refinishers in Orange, VT

If the scratch is large enough that it compromises the integrity of the wood, a wood filler probably won’t be enough to fix the problem. In that case, you might need to sand and refinish the entire floor or replace a board. If you do use a filler, use one that’s appropriate for the scratch. Water-based wood fillers work for small gaps or gouges, while epoxy has added strength to fill larger scratches and gaps.

The difference between resurfacing and refinishing is that refinishing only works on solid surfaces that are in good condition, whereas resurfacing will restore a cracked or worn surface to its original, blemish-free state. Refinishing will leave you with a smooth and glossy surface you can’t get from resurfacing alone. If that’s the look you’re going for, contact a local concrete finishing contractor to achieve it.

Yes. A good mixture to condition your leather is made from one tablespoon of natural baby soap, a splash of vinegar, and 2 cups of warm water. Mix these ingredients in a bowl and use a microfiber cloth to rub it into the leather in small circles. 

You can apply the same technique with a mixture of one part vinegar and two parts linseed oil. Once you’ve applied this to leather with a cloth, let it sit for 10 minutes before buffing with a small cloth.

If your wood stain is still rubbing off after the recommended drying time, it means the pigments didn’t soak into the wood properly and remain on the surface. There are a few possible causes, including applying the stain in hot temperatures, applying too much stain, or failing to wipe off excess before it dries completely.