Get matched with top garage cleaning pros in Halifax, VT

If you open your garage manually, you don’t need sensors. If you have an automatic garage door opener, sensors are required by law. The federal law UL 325 mandates that all residential garage door openers in the U.S. must include sensors. Designed to prevent accidents and reduce the risk of entrapment, the sensors should be able to reverse the motion of the garage door within two seconds of detecting an obstruction. The sensors are there to keep you, your family, and your belongings safe from a door that might otherwise come down too hard or too fast.

Fiberglass is considered a favorite garage insulation choice due to its combination of affordability, ease of installation, and overall effectiveness. Fiberglass provides good thermal resistance, helping regulate garage temperatures and minimize heat transfer. Additionally, fiberglass is moisture-resistant, reducing the risk of mold or mildew formation.

We recommend hiring a garage door professional to install a garage door opener for you. Garage door openers aren’t terribly complex, but setting them up properly, setting the lift and drop speed, and installing sensors that work correctly can take a few hours for a DIYer. The cost to install a garage door opener is around $400, and it will save you a lot of time and frustration. Garage professionals have the skills and equipment necessary to work with potentially dangerous garage door components, like springs.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.