Get matched with top locksmiths in Canaan, VT

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

Keyless locks are often considered safer since they’re protected by passcodes instead of a physical key, making it harder to be picked. However, they are not infallible. And like all electronic devices, outdated models are more prone to problems and safety concerns. If you’ve experienced multiple lockouts in the past year, or your lock is responding slower than usual after you key in the passcode, it might be time to upgrade to a newer one. Even if your lock is working fine, you should still change your access code at least twice a year.

When it comes to how to get a stuck key out of a lock, the simplest way is to use some kind of lubricating substance. One option is to apply graphite powder while wiggling the key gently. As the graphite fills the lock, jiggling should loosen the key enough to allow you to pull it out.

The most secure lock for a front door is typically a deadbolt. There are many types of deadbolts to choose from, the most basic of which is the standard single-cylinder deadbolt. This is the lock you find installed on most front doors. For added security, you could go with a double-cylinder deadbolt, which requires a key to operate the lock from both the outside and the inside.