Get matched with top house leveling pros in Richlands, VA

"My attic was lacking in insulation and my crawl space was a mess. Reed’s worked and fixed both. Workers were wonderful and polite to answer all my questions I am so thankful for the fact that they came and helped me. I really don’t know what I would have done without their help. I would recommend them to everyone that has these problems. And I have recommended them to friends and family. My electric bill greatly reduced. Thank you so much thank you thank you"

"Had my patio leveled. They did a great job. Very pleased."

"I had a small but complicated, hard to access, and structurally essential repair job on a 60-year-old concrete deck attached to my 280-year-old Pennsylvania limestone farmhouse. I contacted several masons listed for my area on Home Advisor, and included Mr. Grady as a long shot -- I read about his expertise with historical structures and wished I had access to such an expert craftsman, but I didn't think he'd be interested in my teeny job and assumed I wouldn't be able to afford him anyway. He was the first one to return my call and to look at the job, and I thought his price was fair. I believe now it was way more than fair, considering the time he spent. He did extensive research, going over a structural engineer's report I had done previously on the deck and even examining the original architectural drawings and materials invoices from 1959. He showed up at least three times to complete the repair in stages, and has been back a half a dozen times since then to check the job -- and my location is not exactly in his neighborhood. He accepted only enough payment in advance to pay for lodging for himself and his assistant when they stayed nearby one night in order to be there early the next morning. He gave and continues to give free advice about preserving my stone house and patio. If you prod him a little, he might even share some of his personal philosophy, earned over a lifetime of work that is clearly more of an art form than a job to him. Overall, I'd say you can hire one of many competent contractors and get an adequate job, or you can hire Mr. Grady and get superior work by someone who cares about your property as much as you do."

We’re a family owned and operated company that values honesty and integrity, and stands behind our work. We offer over 40 years of industry experience. We specialize in Asphalt Shingle Roofing installation, replacement, and repairs. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

"I am leaving this review for my sister, Gerline Estep. John and his crew fixed her porch and installed a step and handrail. She does not have internet service, but was so pleased with John's work that she asked me to leave a review for her. I also have used John's service earlier this year when he replaced my roof and repair water leak damage to a bedroom ceiling. I have also left him a review. If you need any type of home repair, roofing, flooring, etc., you will not go wrong with John Rife's service. Best service at the best price. Highly recommend.
"

"This work was done through Choice Home Warranty, with the repair being given to Sears Services. The first Technician diagnosed the problem as being the heating element on the bottom of the ice maker not working, so the dumping motor was under stress to push out the ice from the tray. The ice maker was replaced and tested fine. However, the new ice maker was a new model (the freezer is 13 years old) and appeared to be identical except that the ice maker plug cover did not connect to the freezer wall to cover the plug. The cover was left pushed down on the electric cord and in the path of the back finger that pushes out the rear cube. That stopped the ice maker from working. Only notice it about 30 minutes after the Technician left. Called within hours but had to wait a week for the next appointment. That second appointment was postponed due to an illness of the Technician and pushed back to the following week. The Technician who came completely removed (cut off) the plug cover, which may not have been necessary. I think it would have been possible to cut off the 2 inserts molded into the cover intended to snap into slots in the freezer wall (the old cover used screws to hold it to the wall) and cover the plug and the multi-colored wires going into it. Now all that is visible. I also had the second Technician adjust the side-by-side, separate framed refrigerator and freezer as they had been misaligned by a prior Technician. The magnetic spacer between the units was preventing the refrigerator door from properly closing. The Technician was thorough in his work, removing the bottom panel of the frame kit to get to the levelers on the bottom of the units and also be able to grab and shift the units into alignment. After he left we noticed that the refrigerator door, though closing properly, seems to be easier to open . . . . like the magnetic seal is not as strong. The door closes tight but just seems different. Don't know why."

"The gentlemen were kind, courteous and respectful. As I mention above, my slab was 8ft by 16 ft. Along one 16ft edge, the slab had dropped by about 4 inches. I don't know when it was installed, but I would guess it was part of the original construction (1954), and was enclosed probably in the 70s. The gentlemen arrived with 1 2ft bubble level and 2 digital levels which were perhaps 1ft in length. From there, they proceeded to place their 2 ft level so that its end touched the 16ft edge, the opposite end parallel to the 8ft dimension. They raised the level so the buble was centered and marked the adjacent brick wall about 1 inch up from its base. Did I mention the slab is 8 ft wide in the parallel dimension to their level? Did I mention the slab had dropped about 4 inches along that 16ft edge? I suggested they use my 4 ft level instead, which they really didn't, relying in their 2dt and 1ft levels instead. They raised the dropped edge about 2 inched, and the whole slab about one inch, resulting in the edge which was down 4 inches, being down only 3 inches now. At this point, cracks began to precipitate in the slab, so they suggested we stop, which I agreed. Then they suggested my 4ft level was inaccurate, and that their 2ft level was more accurate, reporting the slab only slightly out of level. At that point, I stacked their level on top of mine, and demonstrated that their level centered the bubble before mine did, but when my bubble was centered, so was theirs; their level was inaccurate with respect to mine! In the end I was told that, once the foam was fully cured, I could get a subsequent leveling. Unfortunately, they had no more open appointments until March. Meanwhile, that slab was under my laundry room, which I removed, temporarily supporting the roof with beams on the surrounding ground, and engineered joists. Since I'd rather wash my clothes at home than wait til March, I decided to level the build a floor over the slab instead, as the foundation for the new laundry room structure (enclosing the plumbing for the laundry room might also prove useful when the outside temperature falls below freezing soon). To be fair, when the job was quoted, I asked about the ability to lift the entire structure, and was assured that wouldn't be a problem, so the guy who quoted the job did not know I would tear the structure down. However, he surely knew there was a chance the slab would crack, and that if it did, they would not be able to address the remainder of the leveling until March. My general review is this: * Admit to the problems which could occur up front so that the consumer can make a wise choice, rather than selling the job with promises of making the slab level. I have no doubt that, give the time, they could make it level. But starting the job in October, and finishing it in March is not acceptable. * Have proper equipment and train your people to use it. Showing up with a 2ft bubble level and 1 ft digital levels, then not understanding that the lift indicated by a 2ft level, when brought to level, is only 1/4th the lift needed for an 8ft span is rank naivete on levels and similar triangles. Not knowing that the pinch of the vile, (or likely the curve, in the vile is offset to one edge, as their 2fter was) determines the accuracy of the level was just the final blow for my assessment of their competence. The fact that I wound up doing exactly what I was trying to avoid; build a wooden platform which was level on top of the sloped slab, makes it seem like a complete waste of $1700 to have them come to my house. I only hope that the result of the foam pumping is that any voids under the slab were filled, and that it now has a foundation under it which will not erode further. I am certain they do fine work, and the price I paid was in line with what i was expecting. The workmanship and apparent level of competence, however, was disappointing."

Family owned. We are willing to work whatever hours to get the job done on time and to the satisfaction of our customers.

"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."

"It went very well, we were extremely pleased. I recommend Total Remodeling Systems to anyone."