"We could not be happier with Martx Concrete! They were very friendly, knowledgeable and prompt with their communications. They exceeded our expectations. We have received many compliments already on how good the project turned out."
"Highly recommended! I contracted with Brick Solutions owner, Joe Walls, to have a badly damaged concrete driveway replaced with brick pavers. I had previously gotten estimates for replacing the driveway with new concrete but I was concerned about damaging the roots of a very old tulip poplar tree adjacent to the driveway. When the concrete contractor informed me if he didn?t cut the roots he couldn?t guarantee the concrete but if he did cut the roots he could not guarantee the tree would survive, I decided to go with brick. Joe said he could do the driveway without damaging the roots. He broke up the old concrete with a jackhammer rather than bringing in heavy equipment. We consulted with an arborist who told Joe what could or could not be cut. When our plan to save a portion of the old concrete did not work out because it was too cracked Joe volunteered to break it up and replace it with brick at no extra charge. He worked carefully, followed all out suggestions, and managed to give us a smooth brick driveway that looks much better than what we had before. In short, Brick Solutions did a great job for a reasonable price and it was pleasure to work with Joe.
"It was good. There were certain things that weren't covered under the plan. I'm not sure if they cut the bushes down in the back around the fence. I had to pay extra for that. They should try get me to know the schedule so I know when they're coming and when they're not coming. Other than that, it takes time to get the workers together. I like Patrick and he's the owner. The thing in the firepit was included with the mulch but he said I had to pay for the materials."
Rock-River Engineering is a design company Professional Engineering for your building or remodeling project. We provide solid structural solutions and creative designs modeled with 3D CAD software. We treat our clients and your building site with respect, always striving for an outstanding project.
Im Jake Livengood and I would like to take this opportunity to briefly introduce our company Livengood Electrical llc so that you may consider our company for your electrical needs. Livengood electrical llc is a New small business, electrical contractor based right outside of Charlottesville Virginia, while serving Charlottesville and surrounding countys. Our services include wiring for new construction, Add ons, Remodels, Custom Houses, Additions and trouble shooting. Our company is committed to maintain or exceed standards that are demanded by the best companies call with any questions or in need of a quote! 4348824816! Thanks!
Here at Harris Masonry we believe in quality work. We pride ourselves in our ability to provide the exact service you need in a timely manner. Efficiency is our specialty with every project we complete. Call now for a free estimate. We look forward to earning your business.
We are your most affordable "one stop shop" contracting company that provides all of your home maintenance/construction needs. We work with businesses and homeowners providing quality workmanship at reasonable prices. Additional DBA - Gabriel & Gail Better Business LLC & Gabriel and Gail.
We take pride in handling the vast majority of work in house. The few items we may subcontract out are only to contractors we have used numerous times before and know perform at the highest standard. We are just beginning to dabble into financing.
K&M Quality Carpentry, LLC is a privately owned business with more than 20 years in the\nresidential construction and remodeling business. Have been doing business VA, MD, and the\nDistrict of Columbia since 1994.\n• Contractor\nAs your Contractor, we focus on all the project details to ensure a satisfactory outcome\nfor you. We ensure that all permits for each phase of the project meet or exceed state and\nmunicipal building codes.\nK&M Quality Carpentry, LLC serves as a sub-contractor for many General Contractors\nin the area.\nWe pride ourselves on all the projects we undertake and focus on delivering quality and\nsatisfaction.\n• Repair and upgrades\nNew Customs Homes\nRoofing Flooring\nSiding Doors\nWindows Decks\nPorches Int/Ext Painting\nInsulating Garages\nGazebos Saunas\nCustom Cabinetry Custom Trim\nWood Ceilings Additions\nRemodeling (specializing in Kitchens & Bathrooms)\nIf you have a project or repair that doesn't appear on this list, contact me and I’ll try to meet your\nneeds or refer you to someone who specializes that particular area.\nLicensed (Class A) & Fully Insured
Burrells Forestry & Excavation is a self owned and operated business. We provide construction services such as Forestry Mulching, Land Clearing, Excavation work, Grading, Underground Utility repairs and installs, Demolition, etc. We stand behind our work and strive to provide work that our customers will be satisfied with.
The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it.
Some of the most common metals used by welders include:
Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound
Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.
Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.
Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.
Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.
Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.
The Pamplin, VA homeowners’ guide to concrete cutting services
From average costs to expert advice, get all the answers you need to get your job done.